TCS Rivets/Tool for firewall gutter

[Budz]

Does anyone know if the rivets and tool are still available in this old thread? I tried sending a message a few days ago through this site, but just checked, and it apparently didn't go through. The Nova Research email has also been disabled according to that site. Thanks

https://www.yenko.net/forum/showthread.php?t=104733&page=3&highlight=relay+rivets

[Mr70]

Yes.
https://www.mcmaster.com/products/tubular-rivet-installation-tools/

[McCune]

https://www.ebay.com/itm/285699283585?itmmeta=01HQ6320VTPJG40TBMK1RSZBV3&hash=item4285011a81:g:bP8AAOSwAjlgK-HK&itmprp=enc%3AAQAIAAAA4PtVIISxq5W8mt7yPhIeSTyPf9k2m fOJMuo6EQEGyQgmuZdTfD8aPdbFhX0IAvsDWfe8GpnyHEfZ7zD V%2FmfpQMiO9twErT6xSW%2FD5Rakbwd5WE121OfalXBiB8%2F oDGsNf00dObaCdUBCJT5Y8TuaNBXowdtCJgO8BidQsFZ0CfiDV D2QO1nl99RuG25sFHcDZrhL%2BCpPvirLfcSY4rceKw4FoFYVI w%2FdKvKgqKfE2gVWYePRdB3l9rwIO6EQhmX3FLFEeyw0xLvLv NzeLqULEcXHWNinn3z--Ai7gWprT67W%7Ctkp%3ABk9SR_6NiMO5Yw

[BCreekDave]

In case you want to "roll your own"

Made mine on a CNC mill using an old transfer punch, but a lathe may work.

The rivets I got from my local TrueValue hardware store in the Hillman stuff:

https://shop.hillmangroup.com/ccrz__ProductDetails?sku=1278&cclcl=en_US

[mhm1966]

I made a tubular rivet tool out of an old punch on a lathe too. I also made a fitting to go in this rivet tool to get to areas where a punch was too big and you couldn't use a hammer to peen over the rivet.

[169indy]

Hansen Rivet Co is a good source also.

https://www.hansonrivet.com/

[Budz]

Thanks for the info guys

[CamarosRus]

Would someone loan me the above Green Handled Rivet Tool, OR can I send you
my parts to rivet

Need 70 Camaro ashtray rivets & Firewall Gutter / TCS Relay Rivets Installed

Contact [email protected]
Chuck Sharin