PDA

View Full Version : 70 LS6 4spd Conv


JRSully
05-19-2024, 01:42 AM
$600k for a White LS6 4spd Conv at Mecum, quite a #. Seems like the Mopars are dipping and the GM stuff climbing,?

Steve Shauger
05-19-2024, 01:48 AM
$600k for a White LS6 4spd Conv at Mecum, quite a #. Seems like the Mopars are dipping and the GM stuff climbing,?

Some cars did well even if not that original....

JRSully
05-19-2024, 01:57 AM
Assuming that LS6 had some Kabuki theater behind hit?

Mr70
05-19-2024, 11:32 AM
40,267 miles,VIN# 136670B155423 Subject Car. https://www.mecum.com/lots/1118252/1970-chevrolet-chevelle-ls6-convertible/?fbclid=IwZXh0bgNhZW0CMTEAAR0dePgNAnKJrK_YjgsfKigy a5VWyVAZ9fsS5HwKwBnUv3erqSfJTU3Vxq4_aem_AUPB0437se ZsOFrp5a4HigmhPLw3Ix61r8ojXa3LXZGa0QPVs22_RBqW-HF-ftiBjsQmNMZ_i96JYM-yIfTuncxC

mrays
05-19-2024, 06:22 PM
There was an extensive photo album with this car. Here are pictures of the engine and transmission stamps along with the trim tag and the signs that were by the car. The signs just say the car has a correct drivetrain, but the photos show the VIN stamps on the engine and transmission. I talked to the owner and we said the car has its original drivetrain. He said it was kind of rough when he found it and was painted Cranberry Red with black stripes. They didn't find any build sheets when the car was restored, but he had the GM of Canada paperwork. The restoration was just recently completed and he never even drove the car. I don't believe he had it inspected or certified by anyone. I was surprised it went for as much as it did. Was this a known car?

Ralph Spears
05-19-2024, 06:56 PM
They used an 8 for the letter B in the VIN stamp ????

RobR
05-19-2024, 08:26 PM
.

thehornworks
05-19-2024, 08:52 PM
Tranny stamp looks reworked. smooth and "P" should be a little different.

GotGrunt
05-19-2024, 11:18 PM
They used an 8 for the letter B in the VIN stamp ????

I’ve seen that more than once on Baltimore built Chevelles. This particular car not only has the 8 instead of the B, it also has an 8 instead of a 0 for the model year. My buddy owned a 70 ragtop many years ago that, just by chance, was built on the same day as this LS6. It has the same error, 188 instead of 10B. I would guess all the cars built during that shift were stamped that same way.

FWIW, the engine stamp looks good to me.

Steve Shauger
05-20-2024, 01:00 AM
I think the term correct speaks for itself.

the427king
05-20-2024, 01:40 AM
Trans date fonts do not look right. The vin fonts and spacing are no way a match from engine to transmission

GotGrunt
05-20-2024, 02:34 AM
I agree, the trans stamp doesn’t look right.

iluv69s
05-20-2024, 12:51 PM
Definitely an alignment problem with the VINs.

the427king
05-20-2024, 07:40 PM
Those 3s for one arent even close to being the same font

Steve Shauger
05-20-2024, 07:52 PM
Those 3s for one arent even close to being the same font

"Correct"

80stang
05-21-2024, 12:19 AM
I good friend of mine who owns LS6 and L78 cars went to see that car for someone. I asked him what did he think. He said restamps and a mess. His words not mine. I have not seen that car and didn't ask for details.