View Full Version : Dash carrier resto
ALLZS
09-19-2024, 08:07 PM
is there still anyone restoring the original 69 camaro dash carriers
William
09-19-2024, 09:26 PM
Just my 2¢ from 49 years of '69 Camaros. I wouldn't bother. Originals were brittle 20 years ago; wiper switch pegs and the lower trim cover tabs usually broken off.
There have been two repros available for some time, both well-done.
thehornworks
09-19-2024, 11:05 PM
Check with Mike at Instrument Specialties
ALLZS
09-20-2024, 12:27 AM
on the repro ones what is the best one out there
rlw68
09-20-2024, 01:00 PM
I used Polyvance Plastifix to rebuild the bottom of the radio opening and knobs where it had been cut out. It also worked great on a cracked wiper switch stud, and a missing tab.
https://www.polyvance.com/PlastiFix-Kits-1/2503/
The steps for reconstructing a tab are shown in this vid
QNu-pQdPWKY
Their website has videos for other types of repairs. Pictures of mine below.
Using the molding putty to rebuild this wallowed out radio knob hole
268751
268753
Studs are easy. Platifix can be applied in layers to reinforce these also.
268754
268755
The area where the bottom of the radio opening was cut out was also repaired using the molding putty.
268752
Radio opening rebuilt, knob holes filled, and new tab added
268749
268750
Polyvance is really nice to work with.
Rsconv68
09-21-2024, 02:45 AM
I’ve had good luck with JB Plastic Bond, and it’s black.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.