11D COPO Chevelle???

[Supergas990]

Would a 1969 Chevelle (Baltimore) with an 11D build date fit the timeframe for a COPO Chevelle?

The VIN is late enough to correspond with the build date, but I don't really know what the accepted timeframe is.

Any input is appreciated. http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

Blair

[Supergas990]

Here's the link to the auction. http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2457294577&category=61 64&sspagename=STRK%3AMEBWA%3AIT&rd=1

He e-mailed me the motor stamping: 19B326463 T0324MP

Also he provided the cowl tag info:

ST 69 13637 BAL 161444 BDY
TR 795 65 E PNT
11D B L 074899

Let the games begin http://www.yenko.net/ubbthreads/images/graemlins/headbang.gifhttp://www.yenko.net/ubbthreads/images/graemlins/headbang.gif

[Belair62]

How about a rear end stamping........

[Keith Tedford]

The earliest COPO and Yenko Chevelles that I know of are early February. A late March engine wouldn't be original to the car but a lot of these engines broke and were replaced over the years. If it is real, fine. If not it could make one nice clone. If it is a real SS car, it would be worth doing a restoration. The KQ rearend would be another good clue. 4:10 rearends in SS396 cars were coded KK.

[JoeC]

http://www.yenko.net/ubbthreads/images/graemlins/thumbsdown.gif

[John Brown]

It's always a laugh reading ebay feedbacks of people with minus (-) numbers. http://www.yenko.net/ubbthreads/images/graemlins/bs.gif

[Kim_Howie]

The rear end is not correct http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[Chevy454]

Just a quick heads-up on this car...

After several failed attempts on Ebay, the owner is now shopping this car around as a "matching numbers" COPO Chevelle, complete with original KQ rear, and possibly a new trim tag...according to those looking at the car last year, it was a 396 car with a KK rear with a '70 454 in it and an 11D build date. There's a LOT more to this story than I care to get into, but if you're bored, here's some more info:

Team Chevelle thread 1 (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=30;t=003086) - Team Chevelle Thread 2 (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=36;t=000019;p=1)

[bkhpah]

Changing the trim tag to a more "attractive" date will do nothing for the VIN range of the car since there is a range on dates there as well...BKH

[YenkoChevelle69]

[ QUOTE ]
Just a quick heads-up on this car...

After several failed attempts on Ebay, the owner is now shopping this car around as a "matching numbers" COPO Chevelle, complete with original KQ rear, and possibly a new trim tag...according to those looking at the car last year, it was a 396 car with a KK rear with a '70 454 in it and an 11D build date. There's a LOT more to this story than I care to get into, but if you're bored, here's some more info:

Team Chevelle thread 1 (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=30;t=003086) - Team Chevelle Thread 2 (http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=36;t=000019;p=1)

[/ QUOTE ]

This one should be on the best seller's list. It's a great read and I suggest that anyone who wants a great laugh... should read it. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Chevy454]

You're right on BKH, but some how this character forgot that little detail! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Keith Tedford]

Our 396 Chevelle at B345383 is about 19,000 after this car but was shipped February 7. Sounds like someone stamped the block without understanding the relationship of production numbers to dates. Buyer beware. http://www.yenko.net/ubbthreads/images/graemlins/wink.gif

[jfkheat]

This car is listed on Ebay again. This time he says: "So this car is an original COPO 427 Chevelle, and in fact it's one of the earliest ones made."
James

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2486014514&catego ry=6164

[JChlupsa]

Yep and if you read further it now has a Build Sheet. Or should I say one can by obtained.

[Alss]

A real bunch of horse sh#*.Can not accept the truth that the car is not a COPO and is trying to "come" up with documention. Even going as far as making up stories about vin numbers being available. A bad liar at best.

Albert

[Belair62]

If it was me and I knew it was absolutley real as he seems to think...I would wait for the paperwork from Oz...

[Mr70]

If it was you,we would have shut you up months ago... http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Belair62]

http://www.yenko.net/ubbthreads/images/graemlins/haha.gif http://www.yenko.net/ubbthreads/images/graemlins/haha.gif

[Charley Lillard]

He doesn't think it's real. He was told about it having a 454 in it when it was inspected before. He is just trying to scam someone by making this crap up. And where is this supposed guy with the records ?...Not even good Fairy tales

[ACES 070]

Jeeeeeez does this guy not get it? absolute scam,, http://www.yenko.net/ubbthreads/images/graemlins/bs.gif

[Canucklehead]

Sounds like he's trying to justify his scam

[Supergas990]

All of this rehash is getting old. If it's a real COPO than haul it off to Barret-Jackson and put it on the blocks!!!!!!!!

Otherwise, let's call a spade a spade. http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif

[GM-26]

Nicely Said!!! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[jfkheat]

This guy just won't give up. Here is the latest info that he added to the auction.
James

"Well I am back from overseas, and I was able to talk with Greg Long at D.P.E. (Durability Plus Engines), and yes he said he will authenticate this car, and has verified in writing that the VIN is on the list. He believes off hand that this was the either the 12,13, or 14th COPO made, and probably was a factory prototype prior to being sold, although that's a guess. To date though this is the earliest COPO 427 Chevelle found, we don't know if the others still exist. Serious bidders may call him as he has given me permission to post his number 260-665-8877. Also he will be able to help the successful bidder to refit the car to it's original state, and parts you have to replace will at least pay for a good percentage of the refit. The painting of the car back to gold and the bench seat and trim conversion will probably cost the most. But it's a worth while investment for a guy who wants to store and rarely drive this highly sought after collectable.

THere have been MANY people who have asked for his number to authenticate their cars, please be patient and nice to him, as honestly I don't think there is a lot of money into this process considering the time that has to be spent locating the corresponding records amongst the stacks of paperwork. Most of the cars have been authenticated so theres no real advantage to having all the files organized for the few that haven't from a business perspective. Understandably some of the other guys who do this are expert hobbiest, and do it for the love of the cars, Greg is a business man, and time is money so please be aware of this if you ask him to help you. Thanks for that"

[Belair62]

Please tell me someone has talked to Greg .....I can't wait to hear how he authenticates....

[676767]

Well you know some of the Chevelle Tech boys have contacted Greg and they have been very bad about getting back to everyone. I have read all the threads, sounds like a bunch of negative people who don't know anything, and are willing to commit to slanderous tyrades before all the evidence is in, so maybe some of you should just back off to see this thing to conclusion.

http://www.yenko.net/ubbthreads/images/graemlins/cool.gif

[TDW]

I will give Greg a call today. Will post what he has to say.

[Charley Lillard]

676767..Please fill out your profile.

[Charley Lillard]

676767..Your guy Greg at DPE will sell you a protecto plate for 475.00, a trim tag for 250.00 has a 40K Italian broaching machine to duplicate orig broach marks...He will do all this for money but does not have the time to unveil the Holy Grail of GM paperwork ? Don't you think that GM paperwork would make alot more money than a machine shop would ? I'll take swampland for 200.00 please.

[YenkoChevelle69]

[ QUOTE ]
676767..Please fill out your profile.

[/ QUOTE ]

Yeah Bain, fill it out.

[676767]

I don't know, have you used his services?

[TDW]

I have called Greg all day. Get either a busy signal or an answering machine. Has anyone talked to him?

[Chevy454]

I've talked to Greg @DPE, and he had nothing on our COPO cars...but he did reinforce the fact that he could make me a POP, could stamp or alter trim tags, and could recreate the broach marks and restamp the numbers on a block. When I specifically asked about the original GM paperwork, he said he'd have to give me a number of someone for me to contact... http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif

[JoeG]

Mr. Fix-It----

[676767]

NOw Now aren't you forgetting that you were quite an irritating person on the phone, and that I just didn't feel like talking to you other than foster your automotive needs with real business! I pass you off to those who could get you the GM paperwork on your car, Bain is right you are a jerk

[JoeG]

Maybe BAIN could fill in your profile?----------

[sYc]

[ QUOTE ]
Maybe BAIN could fill in your profile?----------

[/ QUOTE ]

Would be nice if one of them would http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[Don_Lightfoot]

I think this is my first post on this subject here and I think I only posted once over on TC. Man, this just goes on and on and on http://www.yenko.net/ubbthreads/images/graemlins/headbang.gif

I think I'll put in a bid for the movie rights http://www.yenko.net/ubbthreads/images/graemlins/wink.gif

[676767]

Don, a sense of humor http://www.yenko.net/ubbthreads/images/graemlins/shocked.gif!, listen, just between me and you I ve seen how things work around here and I would check that humor thing if I were you, the forum police are whatching and it's a punishable offense around here, but you didn't hear it from me http://www.yenko.net/ubbthreads/images/graemlins/wink.gif.

[SS427]

I too have not posted on either site regarding this subject. It is obvious no one on either site is interested and the best way to make this and any other senseless threads go away is to not feed them. Scammers thrive on this stuff and the more we talk about it, the more they keep it going and also the more publicity they get which unfortunately, usually sells the car even after all was said.

Just an opinion. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[Charley Lillard]

Nah, we like humor. We just get annoyed when scammers try to make real cars out of fakes just to make a buck. It always happens when there is money to be made. Kinda like the guy that had the fake Dana with paperwork that we found he had stolen off of another site. He also got angry when we told him he was a crook. Same story.

[JoeG]

http://www.yenko.net/ubbthreads/images/graemlins/wink.gif http://www.yenko.net/attachments/92979-74271.jpg

[676767]

Well so people don't like being called a crook " really" what if your wrong, you know my intents for real, you can read my mind you know that?? THe thing is Charlie this isn';t something you would say if you and I were eye to eye, at least not unless you were certain I was certain I was a crook. I don't know anything about a fake Dana, but I have been slowly gathering historical information about the car concise detailed info from previous owners, and I hope to go right back to the dealer that sold it. Thats my goal, now that isn't the actions of someone who is crooked searching for the truth, so all I can say is what drugs are you on that make you think you can read minds and know what people are thinking coz I want some too!!! http://www.yenko.net/ubbthreads/images/graemlins/haha.gif

[DarrenX33]

[ QUOTE ]
Don, a sense of humor !, listen, just between me and you I ve seen how things work around here

[/ QUOTE ]

Guess again!

[Charley Lillard]

In your Ebay description.... "The car only has 70,000 documented miles on it, but NONE of the parts are original, except maybe the engine,".... Now you were told before you posted the Ebay ad that the car had a 70 454 in it when it was inspected before. Now you are inferring that maybe it has the orig engine. That alone is enough to put you in my crook category http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Chevy454]

[ QUOTE ]
Poted by 676767:

I have been slowly gathering historical information about the car concise detailed info from previous owners, and I hope to go right back to the dealer that sold it. Thats my goal

[/ QUOTE ]

[ QUOTE ]
Posted by 676767:

NOw Now aren't you forgetting that you were quite an irritating person on the phone, and that I just didn't feel like talking to you other than foster your automotive needs with real business! I pass you off to those who could get you the GM paperwork on your car.

[/ QUOTE ]

Wait a minute 676767, Bain, or Alan, or Greg, or whatever the heck your name is: you own this *alleged* COPO Chevelle, and you were the "Greg @ DPE" I talked to on the phone that has all this miracle paperwork and is gonna document this Chevelle? Ahhh, it's all making sense now...

http://www.yenko.net/ubbthreads/images/graemlins/bs.gif BAIN = GREG http://www.yenko.net/ubbthreads/images/graemlins/bs.gif

[JoeG]

http://www.yenko.net/ubbthreads/images/graemlins/grin.gif----Will the "Real" Bain--Greg---or Alan--please fill out the @$%&*@ Profile!!!---- http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Mr70]

After reading about his NOPO on three different websites for the last 8 months,I can think of at least one other name for him....

[jfkheat]

The discussion about this car is getting more interesting all the time. I have been reading about it on the Chevelle site. It seems that whatever his name is has been planning this for several months. Here are some of his post from as far back as December 2003.
James

Bain
Tech Team
posted 12-30-2003 11:30 AM
--------------------------------------------------------------------------------
I would like to know how common it is to restamp and engine to make appear Nos matching and how can you tell if it has been restamped?

Al

Bain
Tech Team
posted 01-01-2004 06:20 PM
--------------------------------------------------------------------------------
Hey guys here's one I found a complete 427 in engine very good running condition wiht the following info:

Casting numbers: 3963512

Motor No: T0324MP

By the oil filter Hiper F Pass

The pad number though looks to have been restamped possibly defenitly decked.

It seems to be less compression and was rebuilt to a lower performance HP.

ny comments on the authenticity of these codes. I was think about finding a 69 chevelle that is an SS 396 with matching No's througout and popping this bad boy in it built back to yenko specs or at least to the the near same 425 HP rating?

Al

Bain
Tech Team
posted 01-02-2004 12:36 AM
--------------------------------------------------------------------------------
Well I do see your (nice Ones) are going for, and they are just using a regular non date matching 427, 454 block or 396 blocks with 427 cranks and acessories, not the real deal.

How about a car that had the matching No's engine long gone, but the rest of the gear still original, then ;pop in this engine of the era with the right s=date number anyway.

As far as casting number go can those be faked?

Al


Bain
Tech Team
posted 01-17-2004 09:24 PM
--------------------------------------------------------------------------------
Ok guys here's one for your noodles here are some codes tell me what you think:

VIN 136379B326463

ST69 13637 BAL161444 BDY

TR 795 65 EPNT

11D B L 074899


Bell Housing Cast No. 3963512 B11 70

Intake# 3933163

Head # 3919840

Oil Filter area cast
HI PERF PASS

Head # 3919840

Sopposedly the head pad number behind the alternator matches the last No. on the VIN.

My thought was this is at the very least is a COPO 427 Engine from 1970 probably a replacement for a blown engine. I was think that at the very least you could call this a very original COPO replica.

Ideas on value or if it is a COPO car?

Al

Bain
Tech Team
posted 01-18-2004 05:21 PM
--------------------------------------------------------------------------------
Yea hey von thanks for that I did look all tyhe numbers, I can get the car probably for 10000, the guy is desparte, but he already sent all the numbers to COPO allegedly and they said no or some place thatt gets money if they can confirm it's status.

But yea it's feasable that it's COPO ordered engine, but I was thinking someone did a good job
putting the engine together to look like a COPO, but hey isn't a good replica worth it if it's in good shape?


Bain
Tech Team
posted 01-30-2004 08:56 PM
--------------------------------------------------------------------------------
OK here is the deal, I have a 1969 Chevelle I just bought VERY STRAIGHT No Rust, was restoreda while back, here si the conflict I am facing:

It has a COPO 427 with the proper heads and intake solid cam and lifters, but the car is a late 1969 Mid November adccording to the Cowl tag, and the engine althoug is casted properly for the COPO it is also date coded on the bell Hosuing B 11 70 February 11 1970.

No one can tell me if it's a real COPO, if it was it would have had to have been ordered in late 1969 with a wait on the engine, which I don't think is too inconceivable. If it's not a COPO chevelle in the restoration should I make it a COPO chevelle replica or Yenko Replica to achieve it's best market value?

AL Bain

[Belair62]

[ QUOTE ]
I would check that humor thing if I were you, the forum police are whatching and it's a punishable offense around here, but you didn't hear it from me

[/ QUOTE ]

http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif If we didn't have a sense of humor...you would be the very first to know about it. No one knows who you are,you are posting conflicting statements,and then you have the stones to tell everyone you know how it works around here....if you have the goods like the E-Bay auction says...tell it...if not...take off eh ! This is old.

[Stuart Adams]

Good diggin!! Wow.

[DjD]

Good condensed version... If anyone has some time to kill I dug through some of the threads Bain started on TC and listed them...

Last post on this page... http://www.chevelles.com/forum/ultimatebb.php?ubb=get_topic;f=36;t=000024;p=6

http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif

[sYc]

Nice return. Game, set, match. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[JoeG]

Great--Alan Bain Laden--COPO TERRORIST---

[Stuart Adams]

Man, you guys are good.

[jfkheat]

I don't take credit for it. All I did was read through some of what was posted on Team Chevelle. I just copied some of the more interesting post and pasted them here.
James

[68z302]

[ QUOTE ]
take off eh !

[/ QUOTE ]
http://www.yenko.net/ubbthreads/images/graemlins/laugh.gif Reminds me of Bob & Doug MacKenzie! http://www.yenko.net/ubbthreads/images/graemlins/laugh.gif
Let's have another beer eh! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Denis]

http://corvettes-musclecars.com/yenko.net/busted.gif

[Mr70]

Denis
May I make a request?
I think this topic is appropriate for the two guys who are talking,then the other rips his stomach out of his chest,beats him with it,& wears it on his head...CLASSIC! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Denis]

I know the one but the link to it, along with my laptop, was stolen some months ago.

[676767]

Oh my I feel so exposed http://www.yenko.net/ubbthreads/images/graemlins/eek.gif, what a joke I read through the threads, and clearly someone is having fun jumping to rash conclusions, whitch hunter. Look a negative person looking for fraud could easily see that immediately, thats ok if you want to believe that, but without really knowing who I am where I have been and what my life is about it's just rash conclusions. THe main point is this, have I actually talked to customers and tried to con them when a potential buyer comes a long and a few have, I tell them the truth thats porobably why the car isn't sold, a dishonest person probably could have offed the car for a better than average price. As far as it being a COPO I do have authentic detailed and concise owners declaraitons from guys who have nothing to gain by lieing, and I am hoping to get further toward the beginning of the history, I believe that this car will end up being authentic by everyones standard, and you better believe at this point some people would rather that not be true for obvious reasons. Chill out I am seeking the truth, not deception. http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif And truly I could explain the descrapancies of the threads but why I don't owe it to you, and clearly if I am not misleading potetial buyers into paying too much for this car there is no crookery. Anybody who states that I am crook becasue of your really undamaging evidence is talking out of their ass.

Thats it I am done talking to you guys, I think I will start a new car sales business!

Square Deal Al's Authentic early model COPO sales http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

[Belair62]

Pretty honest guy....come back when you actually have something valuable to post....let all the sites know when you get your paperwork will ya ! You have been pulling this same crap for months...

[DjD]

[ QUOTE ]

Thats it I am done talking to you guys, I think I will start a new car sales business!

Square Deal Al's Authentic early model COPO sales http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

[/ QUOTE ]

So you're admitting Al Bain and Greg from DPE are one in the same???? That says tons for your credibility right there...

[Canucklehead]

Too-Da-Loo!!!, and don't let the door hit you on the ass on the way out! http://www.yenko.net/ubbthreads/images/graemlins/bs.gif

[Eddie M.]

Quote: Thats it I am done talking to you guys, I think I will start a new car sales business!

With nothing to hide I wondered why you changed your name http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif I guess that says it all

[Charley Lillard]

So 676767 or Bain or Greg or Armorman has now stated on the Chevelle site that Ed Cuneen has purchased his car.... Ed, are you out there ?

[jfkheat]

I don't think Bain ever actually said Ed Cunneen bought the car. He said the initials were EC. When someone said they were going to call Ed, Bain said Ed would probably deny buying the car.
James

[gemleeus]

at first i felt sorry for you, reading all the harsh posts at the tc site, then you fell right into the trap which lured you exposed to the community, if you'd just held your composure. don't say its no ones business, YOU made it everyones. this is a lot of peoples lively hoods your messing with here, these rare and precious cars mean a lot to muscle history, i'm in awe everytime i'm around one and am striving in order to attain my own example of this era, by your and others actions it makes all that much difficult to achieve. you should be ashamed prancing in here and posting the things you have, you should have the utmost respect and recognize where you're at. the plain facts are simple, you have been found out, now you're acting like some silly school boy trying to justify your actions. give up, these people know more about the car now than you ever will and probably know exactly who you are and where your from.

[jfkheat]

Now the car was delivered to Yenko as a prototype. Here is his latest illusion.
James

Bain
Tech Team


posted 08-12-2004 09:36 PM
--------------------------------------------------------------------------------
Dear Buzzbomnb, I did here that about the Nova deal, it was one of just a few though right.

And yea 80,000 was the most that COPO hit.

Here's the deal though if we are right this isn't just any COPO Chevelle, it might actually have been delivered to Yenko Chevelle in December as the dealers demo car, thats where our research is taking us. This car was delivered prior to any other yenko ordered COPO Chevelle, and was most likely a Factory prototpye that made it to a dealer for demo purposes. I can't imagine a better place to demo one than Yenko Chevrolet, so we are researching that right now. THat would make it a bit more expensive I think, what do you think.

Ok so I think thats it ok anybody else, we can shut this down now right right
--------------------------------------------------------------------------------
From: Houston | Registered: Dec 2003 | IP: Logged |

[Belair62]

When I go to bed tonight I am going to say a little prayer that it is a COPO....prototype,demo whatever and he sells this car and moves on quickly to professional golfing

[JoeG]

I vote we just throw him in a Vat of boiling Preparation H-----

[Belair62]

[ QUOTE ]
I don't think Bain ever actually said Ed Cunneen bought the car. He said the initials were EC. When someone said they were going to call Ed, Bain said Ed would probably deny buying the car.
James


[/ QUOTE ]
Ed was not EC...but we probably could have guessed that.

[Bill Pritchard]

Ed C. has registered on Team Chevelle and posted that he has had nothing to do with Bain or DPE.

[68l30]

Uh,thanks Belair! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif We don't need any more "story tellers" on the golf courses either.... http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif


Steve

[Belair62]

http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[gemleeus]

now he's over there calling ed c. a crook

[Steven J]

676767/Al/Bain/Greg, or maybe even "Scott",
Your car was delivered to Baugher Chevrolet in Waynesboro, Virginia on 12-03-68. Hope that helps with your Yenko demo theory. http://www.yenko.net/ubbthreads/images/graemlins/haha.gif http://www.yenko.net/ubbthreads/images/graemlins/thumbsdown.gif http://www.handykult.de/plaudersmilies.de/flipa.gif

[Mr70]

Who was that Masked Man?..........

[676767]

I don't get it, how could you possibly find info like that out. Most sates don't keep records back that far.

The bet on Chevelle Tech is your just giving a Bain a Wild Goose to follow up on http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif

[Canucklehead]

You would be surprised what these guys can come up with http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

[Bill Pritchard]

[ QUOTE ]
The bet on Chevelle Tech is your just giving a Bain a Wild Goose to follow up on

[/ QUOTE ]

I'd be willing to bet it's not a wild goose. I believe Steve has connections http://www.yenko.net/ubbthreads/images/graemlins/worship.gif

Nice graemlin, Steve http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

[676767]

Hi Bill HGows it going, so old Steve has connections Huh, we did bother to check his story out and the dealers couldn't even muster a record after seven years old, so it stands to reasons that either

A) There a hi performance record on this car as nobody cares abotu records of 307 Malibus or

B) He has no connections and he's just sending people on wirld goose chases, bravo nice one, but please the worship Gremlin is a bit much Bill don't you think http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif

We did go back and looked up the threads on Bain's alleged accusations of EDC, and I had to laugh, it looked like respect to me and some good questions that EDC might be afraid to answer truthfully, and since he doesn't need to he ducked. http://www.yenko.net/ubbthreads/images/graemlins/shocked.gif

Djd man are you a wanna be detective or what, I would say 4th rate novice with patterns of rash conclusions at best. Wow, there are really people like you???? http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif

ABGLSCOTT

[Mr70]

I Can Vouch For Steven J.
Who Can Vouch For You?

[gemleeus]

anyone can tell by reading your posts its you, stop acting like that please.

[Stuart Adams]

Man I just came back from lunch and saw this post, PUKE!!

[Belair62]

[ QUOTE ]
The bet on Chevelle Tech is your just giving a Bain a Wild Goose to follow up on

[/ QUOTE ]
Make up your mind on who you want to be before you post anymore responses..(Forum Police) http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif

[DjD]

[ QUOTE ]
Djd man are you a wanna be detective or what, I would say 4th rate novice with patterns of rash conclusions at best. Wow, there are really people like you???? http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gif

ABGLSCOTT

[/ QUOTE ] Ya, they're called honest... I didn't draw any conclusions, rash or other wise, did you see the question marks?


One quick question...

http://balr0g.free.fr/hfr/img/whydoes.jpg

When it comes to trolls...

http://balr0g.free.fr/hfr/img/YOUROCK%21.jpg

and one last comment, your problem is obvious...

http://balr0g.free.fr/hfr/img/8-picture1.jpg

[676767]

OK Mr. 70 fair enough well Steve how did you come across this information, perhaps we should have asked in the first place?? http://www.yenko.net/ubbthreads/images/graemlins/blush.gif

[hvychev]

I know Steve as well and if he makes a statement like that it is the truth.

[676767]

Well we don't know Steve and the vouching system is a bit mafioso, nevertheless assuming for the sake of discussion that if Steve Says it then it's true, doesn't negate the natural question that most would ask, "Gee Steve how did you find that out"? I think it's safe to say thats the 52,000 dollar question. If he can't say by default it isn't true,sorry thats what all the people would say who don't know Steve.
http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[YENKO DEUCE REGISTRY]

Who's on first?

[Steven J]

I was going to have somebody speak for me, but that would appear to be a little "mafioso." Bain, do a search on this site for NICB. That is where the info came from. I was able to have someone (who was that masked man ?)with access to the organization find the info for your car. I was very hesitant to do so,because the info is not meant for hobby purposes. The info is legitimate, assuming the records are accurate.

Since the evidence indicates that a potential fraud is being perpetrated, I thought that the right thing to do would be to provide the information so that potential buyers could make an informed decision.

I can not say what your car is, but the evidence speaks for itself.


PS : The "masked man" will not obtain anymore information, except for official purposes. http://www.yenko.net/ubbthreads/images/graemlins/flag.gif

[Mr70]

FORE!

[Supergas990]

Great work Steve!!!! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

Game, Set, Match!!!!!!!!! http://www.yenko.net/ubbthreads/images/graemlins/blush.gif

Blair

[gemleeus]

its all over but the crying

[676767]

You know Steve I think your one of the few guys I have run into with a descent attitude, and yea I tried one of those searches, friend of friend you know, but apparently it was thought they didn't keep those kinds of records so no one tried. However I would like to point out that just becasue it was delivered to Virginia it doesn't mean that it isn't a COPO 427! Just means that it isn't a Yenko Chevelle, and if you study the threads on Chevelle tech carefully you probably could surmise that I was just upping the anti to the Naysayers. Well so no more info I see, Ok well thanks for that http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[YENKO DEUCE REGISTRY]

assphincter says 'what'

[Steven J]

[ QUOTE ]
assphincter says 'what'

[/ QUOTE ]

[Canucklehead]

You know it seems here that you have a slim chance that it's a COPO, so instead of trying to sell it as such and tell people it is, why don't you conceed and tell them that your research so far has pointed to the fact that you have a regular noncopo chevelle........................"END THE MADNESS"

[YENKO DEUCE REGISTRY]

http://www.yenko.net/ubbthreads/images/graemlins/grin.gif