1968 Baldwin Camaro Tubbed & Tubed

[Mr70]

Check out this guys webpage.
http://www.cardomain.com/memberpage/295985/1
Is this Camaro considered Baldwin Modified or Baldwin/Motion Modified?
http://www.yenko.net/attachments/133034-baldwinmotion.jpg

[Born30YrsLate]

Holy Chit...poor car...lucky guy...

[55chevy]

Yeah I saw that a while back and was going to start up a thread about it. I'm pretty sure the owner is a member here.. How about some history? Do you know which B/M Camaro that is? Was there any old features of it in original condition?

[camarojoe]

[ QUOTE ]
Holy Chit...poor car...lucky guy...

[/ QUOTE ]

That pretty much sums up my thoughts as well. http://www.yenko.net/ubbthreads/images/graemlins/eek.gif

[JoeG]

That's Mike----(Motion Camaro).....

[Jeff H]

Hmmm, it lists the headers(loose). Does that mean the car was sold with the stocke exhaust manifolds and smog? And the buyer had to intsall headers and connect the exhaust? Cool paperwork. Did any of the supercar dealers sell cars with headers installed or was that illegal?

[JoeG]

Cars were delivered from Baldwin Chevrolet to Motion with stock exhaust and smog intact--Headers were installed at Motion.....

[Mr70]

So this is considered a Baldwin-Motion Camaro yes?
Is this how the papers looked,or were there receipts from Motion Performance as well?
I have never seen paperwork on them,so I am asking.

[JoeG]

That's the Baldwin Chev. invoice Rick showing the car as being sold new---there is even a trade-in involved, so he had to go thru Baldwin--The options are listed on the invoice. If you went thru Motion you would get documentation on PhaseIII's--. The other cars that had some mods or just an engine conversion would have gotten a work order.This would be a B/M Camaro.

[Charley Lillard]

Pretty Cool...Might hold it's own at SCR8 drags.....

[55chevy]

I still want to know what the car looked like originally http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[djunod]

There's a link in the first message of this thread... follow that to see a picture of it in a magazine ad.

Also is this area of the forum there has been one or 2 threads already about this car from back in the day.

Seems strange that if the owner is here on the board that he doesn't ever speak up when the subject arises... I guess he likes to keep it on the down-low http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Very cool car! http://www.yenko.net/ubbthreads/images/graemlins/cool.gif

[560CID68]

Great looking car, From all of us Prostreeter's, Good luck chasing your Dream

[djunod]

[ QUOTE ]
Great looking car, From all of us Prostreeter's, Good luck chasing your Dream

[/ QUOTE ]

I take it that this is your car? Looks like it (tracing your posts) http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Very nice. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Motion Camaro]

<font color="blue">I wanna thank you guys for the kind words &amp; encouragement. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif
I have been working on this project a long time &amp; can't wait to finish. http://www.yenko.net/ubbthreads/images/graemlins/crazy.gif
I was trying to get it ready for the Holley Hot Rod Reunion in Bowling Green this June. http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif
Don't think the car will make it, but I will.
Anyone into real nostalgia racing should show up there,
It's a great weekend, with great people. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif</font>

[Mr70]

Very Nice Camaro &amp; paperwork Mike.
Can you bring it to Collinsville Sept. 2-3 for SCR8?

[djunod]

So this is "Motion Camaro"'s car... from previous messages by "560CID68", he has a similar car... with similar paperwork...

[Mr70]

I think these cars are two different Camaros.
Their invoices are not exact.
http://image03.webshots.com/3/8/36/89/97283689ypzKVM_ph.jpg

[djunod]

Ah... but they were sold by the same salesperson http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

BTW---unless you've viewed that image before, you will have to copy &amp; paste it into the browser...

http://image03.webshots.com/3/8/36/89/97283689ypzKVM_ph.jpg

[Mr70]

Here is a similar invoice from 560CID68.
I would imagine Dave Bean sold a few cars in his day. http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif
http://img.photobucket.com/albums/v669/Rick_Peters/97283689ypzKVM_ph.jpg

[Motion Camaro]

<font color="blue">Hey, I have an idea.
Lets get together with the Pro-Street cars.
Maybe @ #7 ??? </font>

http://memimage.cardomain.net/member_images/7/web/295000-295999/295985_15.jpg

[55chevy]

[ QUOTE ]
There's a link in the first message of this thread... follow that to see a picture of it in a magazine ad.

Also is this area of the forum there has been one or 2 threads already about this car from back in the day.



[/ QUOTE ]

I assume he was showing the ad as to what a B/M Camaro originally looked like.. you're saying this Is this THE car from that ad??? I don't think this is the same car from the ad and previous threads.. That was about the "mindbender" B/M Camaro which is an RS. This car that's all tubbed and tube framed out isn't an RS.

Motion Camaro.. do you have any old pics of your car?? Just curious if it was ever featured in original condition in one of the old CARS issues or something. What was the original colors and options it had?

[Motion Camaro]

[ QUOTE ]

I assume he was showing the ad as to what a B/M Camaro originally looked like.. you're saying this Is this THE car from that ad??? I don't think this is the same car from the ad and previous threads... This car that's all tubbed and tube framed out isn't an RS.

Motion Camaro.. do you have any old pics of your car?? Just curious if it was ever featured in original condition in one of the old CARS issues or something. What was the original colors and options it had?

[/ QUOTE ]

<font color="blue">Here are the original options -&gt; http://www.yenko.net/attachments/133034-baldwinmotion.jpg

This car was an original R/S - S/S.
I talked to the original owner &amp; he took off the disc brakes &amp; R/S parts because they weighed too much.
The car has been off the street (legally) since 1971.
Also: The old frame was exactlly where the reverse light used to be. Now that I put in a tube chassis (19"wide), I can put them back in if I want to.
</font>

[djunod]

[ QUOTE ]
That was about the "mindbender" B/M Camaro which is an RS. This car that's all tubbed and tube framed out isn't an RS.

[/ QUOTE ]

I read the option sheet and it clearly states that it is a RS http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Here it is above again http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

[55chevy]

Ok.. that explains what happened to the RS stuff on it.. but is this THE "mindbender" car from all the old ads and magazine articles thats shown on this thread? http://www.yenko.net/ubbthreads/showflat.php/Cat/0/Number/122072/page/0/fpart/1/vc/1
Or is this Camaro one of the unknown ones that came out of B/M? MotionCamaro.. what's the history of your car that you know? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[JoeG]

Mike, after you answer Ed---How is the EFI working out and what is that quick start feature on the Tech 3----

[Motion Camaro]

<font color="blue">Ed,
Mine is one of those unknown ones.
The paint on it is original.
As far as I can tell there were never any stripes.
It only has 27,000 miles on it. (68-&gt;71)

The original owner said he put the headers,
removed the before mentioned equiptment &amp;
a set of slicks &amp; went 10.30's </font>

[Motion Camaro]

<font color="blue">Joe,
I'm still wiring up the car for the EFI.
Gonna put the motor back in next week &amp;
see if I did a good job.

The quick start feature is the initial program
of the TEC3. Put in cyl, fuel, inj. size ,
HorsePower,etc. The ECU gives it a start mode to idle.
All done on a windows screen. http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif </font>

[whitetop]

Motion MIke
Was this the car Mark Timken owned at one time??

[JChlupsa]

Have to ask about the mirrors, who installed them.

[JoeG]

Does all the cars skin/paint look like that photo clip you showed Ed-----Looks great and it's all original?....

[Motion Camaro]

<font color="blue">Whitetop,
The car was purchaesed from the original owner (James ...) by a freind of a freind.
He only had the car a month &amp; wanted the Pro-Street Vega I was driving at the time.
Since I was looking for a little heavier car then, (the Vega was a Super Gas car I put on the street
&amp; was so light that things broke at every pothole),
&amp; he wanted to go racing, we swapped rolling chassis. </font>

[Motion Camaro]

[ QUOTE ]
Have to ask about the mirrors, who installed them.

[/ QUOTE ]
<font color="blue">That would be me. http://www.yenko.net/ubbthreads/images/graemlins/crazy.gif
When I got the car the mirrors were filled &amp;
so was the cowl &amp; rev. lights ( did I metion this was a race car?)
I always liked the later model mirrors, so, there ya go. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif http://www.yenko.net/ubbthreads/images/graemlins/thumbsdown.gif </font>

[Motion Camaro]

[ QUOTE ]
Does all the cars skin/paint look like that photo clip you showed Ed-----Looks great and it's all original?....

[/ QUOTE ]
Yes Joe, it is the original paint. I can't believe it either.
Here is a picture (of a picture) when I used to street drive &amp; show the car back in the late 80's early 90's.
I worked for a dealer, so I got tags to drive the car to the shows when I needed.

[Dave Rifkin]

Do you have any plans to return the car to stock or are you leaving it as a Pro-Street car? It looks like there has been considerable money invested in it but, being it is a real Motion Camaro I would think it might be worthwhile to restore it. (Just my opinion)

[djunod]

Not just a real Motion Camaro, but a Baldwin/Motion Camaro http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

[55chevy]

[ QUOTE ]
Do you have any plans to return the car to stock or are you leaving it as a Pro-Street car? It looks like there has been considerable money invested in it but, being it is a real Motion Camaro I would think it might be worthwhile to restore it. (Just my opinion)

[/ QUOTE ]

Looks like it would be a substantial amount of work to put it back to original condition. Right now looks like Mike is having fun with the car just the way it is and he's already got the docs. to prove its heritage. If it were mine I'd have fun with it for awhile the way it is but at the same time be hording away parts as they come along to return it back to the way it was in early 1969 http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Motion Camaro]

<font color="blue">I just need a doner car for the
firewall/floor/chassis. The rest of the body
&amp; interior is mostly original.
I still have the cluster, glove box, rear panels, etc.
I got a lead on an 67/68 427 4blt block &amp; 3 bbl carb.
I have the original 427 intake for it....BLAH,BLAH,BLAH http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif </font>

[hvychev]

Wow.......does the car still have it's original trim tag and vin plate?

[Motion Camaro]

[ QUOTE ]
Wow.......does the car still have it's original trim tag and vin plate?

[/ QUOTE ]
<font color="blue">As a matter of fact it does.</font> ^^VIN^^

[Motion Camaro]

[ QUOTE ]
Wow.......does the car still have it's original trim tag and vin plate?

[/ QUOTE ]
<font color="blue">And-&gt;</font> ^^Trim tag^^

[Motion Camaro]

<font color="blue"> By the way ... 560CID68, That is one Seeerious
Baddass Pro-Street Camaro.
What do ya think about what I said ... SCR#7 ???
</font>

[Motion Camaro]

<font color="blue"> P.S.: It looks like ya got me in the motor dept.</font> http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[560CID68]

Mike Don't think she will be done for SCR7 but I can't wait to get these two side by side http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[Motion Camaro]

[ QUOTE ]
Mike Don't think she will be done for SCR7 but I can't wait to get these two side by side http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

[/ QUOTE ]
<font color="blue">I meant SCR #8 http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif </font>

[Lynn]

[ QUOTE ]
<font color="blue">Whitetop,
The car was purchaesed from the original owner (James ...) by a freind of a freind.
He only had the car a month &amp; wanted the Pro-Street Vega I was driving at the time.
Since I was looking for a little heavier car then, (the Vega was a Super Gas car I put on the street
&amp; was so light that things broke at every pothole),
&amp; he wanted to go racing, we swapped rolling chassis. </font>

[/ QUOTE ]

Not a knock on your pro street Vega, but............. you traded a Vega for a Baldwin Motion Camaro? What a bandit!

Back in 1976 I traded an Opel Rallye (not a GT, just a Rallye, you know, Gold with flat black hood and black stripes down the side) for a 1969 Z/28 that had only 26,000 miles on it. I had been "rode hard and put up wet" more than a few times, but still, in hindsight, I did all right, although, nothing like you. BTW, mine is also factory black.

Cool car.

Lynn

[Motion Camaro]

<font color="blue">Thanks Lynn.

Neither of us knew what the Camaro was.
When I saw it for the first time, it was just a clean car.
There was nothing on the car to give away its origin.
No hood, stripes, spoilers, emblems .... nothing!

It wasn't 'til much later that I started playing with
it, that I found the invoice &amp; started researching it.

He was happy 'cause he got a full chassis &amp; tubbed Vega
with a Hemi crashbox done by Liberty. (wish I still had that!!!) </font>

[Born30YrsLate]

[ QUOTE ]
(wish I still had that!!!)

[/ QUOTE ]

No you don't http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Motion Camaro]

[ QUOTE ]
[ QUOTE ]
(wish I still had that!!!)

[/ QUOTE ]

No you don't http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

<font color="blue">I meant the trans .... http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

The car ... ummmm ... nah. </font>

[55chevy]

where did you find that baldwin invoice? was it in the car still?

[Belair62]

Nice to see some real Motion cars and not some BS deal Nova etc. that people try to hang a name on. These are cool cars.

[Motion Camaro]

<font color="blue">It was in with some paperwork under the seat.
I didn't see it 'til months after I got the car.
Then I did some research to check things out. </font>

[hvychev]

[ QUOTE ]
It was in with some paperwork under the seat.


[/ QUOTE ]

amazing.......

[Born30YrsLate]

Did the previous owner stick the paperwork there or did he not even know there was paper work under the seat?

[Motion Camaro]

[ QUOTE ]
Did the previous owner stick the paperwork there or did he not even know there was paper work under the seat?

[/ QUOTE ]
<font color="blue">I don't think he knew anything about it.
When I got the car, the guy said he never touched it.
He only had the car for about 1 month.

There was no motor,tranny,driveshaft or hood &amp; still
he said it was too clean to make into a race car.http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

When he got my Vega (which was completly gutted inside, but all steel outside),
he immediately ordered all fiberglass for it. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif(It only weighed 2300lbs in race trim.)

I think if he would have kept the Camaro, he would have done the same.
</font>

[RichSchmidt]

A good friend of mine raced pro stock back in the early 70's and cut up an original Baldwin Motion car to do it,but the car still exists today,and is reported to be in a garage in central Jersey.The car was stolen off the Bladwin Chevy lot back in 1969,and later recovered with no drivetrain and many other parts missing.My friend bought the car as a stolen recovery with salvage papers back in 1969 and fitted it with the powertrain out of his A/MP 67 camaro,and added a glass nose,and had his racing partner drive it for a few seasons in Pro Stock.I even found his car listed in the NHRA list of Fastest prostockers of all time which I belive was for a MPH record.The car had a patriotic red white and blue paint scheme on it and was named "Born Free",and had the neame Neighborhood Garage on the rear 1/4's.The car wasnt a tube car and from what I could make of the pictures had most of the stock floors,and stock front subframe,so who knows,maybe it could be restored by an ambitous restorer.I wonder what Joel would do if somebody wanted to document it.

[Kim_Howie]

I have mag with that car in it. It was white and Born Free was on the door if I remember right. kim http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Motion Camaro]

<font color="blue"> Got the motor back in this week.
gonna try and get it running next week.
Spending a lot of time makin' things fit.
Getting there.</font>

[Motion Camaro]

<font color="blue">At least it's back on 4 wheels again. </font>

[djunod]

Looks awesome! I see you have the fake MOTION inserts http://www.yenko.net/ubbthreads/images/graemlins/wink.gif

[Motion Camaro]

<font color="blue">I bought those valve covers about
a year or so ago on e-bay.
Wasn't sure if they were real thenhttp://www.yenko.net/ubbthreads/images/graemlins/dunno.gifbut took the chance.
Then, shortly after that, there was tons of them out ...
oh well ... I think they're cool looking. http://www.yenko.net/ubbthreads/images/graemlins/cool.gif </font>

[RichSchmidt]

Yup thats the car Kim.,the rear quarter panel says Neighborhood Garage on it,and the guy who built and tuned it is a good friend of mine,and if you have the article with the car and shop featured in it you can see my friend Joe in the pictures.That car is still floating around in central Jersey somewhere,and hasnt ben touched in about 30 years.so I wonder how the history of this car would be documented of somebody wanted to restore it as a Motion car.I would tend to think it might be worth more as a vintage prostocker though.

[Pantera]

Just think about it for a second? It would still be a Motion car and a vintage prostocker with great race history to boot. I can't see where you could go wrong. I can see no need to restore it back to original Motion delivery.

I know I would love to own it as is!!!!

Pantera http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[djunod]

They're the "right" valve covers, just the wrong emblem. You can pull them out with a knife and insert the right emblems.

[Motion Camaro]

[ QUOTE ]
They're the "right" valve covers, just the wrong emblem. You can pull them out with a knife and insert the right emblems.

[/ QUOTE ]
<font color="blue">Oh where, Oh where can I get the right emblem;
Oh where, Oh where can it be ... http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif </font>

[Kim_Howie]

Rich I found a earlier article on the car when it was pained red ,silver and blue it states he bought the car for 700.00 Soon as I can get my scanner to work I will post pictures. Kim http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Motion Camaro]

<font color="blue">Hopefully get it running by the weekend.
Gonna read the Tec3 manual 6 more times then pray.
Wish me luck. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif </font>

http://www.floridasr20s.com/gallery/albums/album24/DSC04252.jpg

[Pantera]

I can tell you that real ones are something you won't like having to pay for. They are hard to find and expensive when you do.

Pantera

[SuperNovaSS]

Joel should sell them to you since you have a legit car.


Jason

[Motion Camaro]

<font color="blue">Does he still have them??? NO WAY!
</font>

[Motion Camaro]

<font color="blue">I tried getting the car running this weekend.
A couple of kicks, burps &amp; a nice big flame from the pop-off valve.
Well, I guess it's getting fuel, air &amp; spark.
Now i just have to get them in the right order. </font>

Let me go read that TEC3 manual a couple of more times http://www.yenko.net/ubbthreads/images/graemlins/confused.gif

[55chevy]

Make sure you don't have your distributor in 180^ out. I seem to do that every time http://www.yenko.net/ubbthreads/images/graemlins/crazy.gif...

[Rat_Pack]

[ QUOTE ]
Oh where, Oh where can I get the right emblem;
Oh where, Oh where can it be ...

[/ QUOTE ]

Mike, you have mail.......I called Joel recently, within the past few weeks, and he no longer verifies his cars nor does he sell the parts. http://www.yenko.net/ubbthreads/images/graemlins/confused.gif Not sure what is up with that? Maybe the model airplane industry picked up? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

That is a BAD BOY HOT ROD you have!!! http://www.yenko.net/ubbthreads/images/graemlins/cool.gif..............RatPack.................

[hvychev]

Interesting.......

[sYc]

[/quote....I called Joel recently, within the past few weeks, and he no longer verifies his cars nor does he sell the parts. http://www.yenko.net/ubbthreads/images/graemlins/confused.gif Not sure what is up with that? Maybe the model airplane industry picked up? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif............RatPack.................

[/ QUOTE ]

Interesting. Joel and I communicate on a regular basis about the hobby and I have not seen any indication he is through certifying Motion cars. In fact, within the last week or so, he and I have discussed a couple of "so called" Motion cars.

As per parts, I know when he was to be involved in the 2002 Motion Camaro project, he had a very limited supply of emblems and some of the other Motion items. At SCR6 he did have us give each participant a pair of original Motion stickers.

[Rat_Pack]

Tom, that is strange because a couple of months ago I was contacted about a 69 Baldwin Motion Nova the guy wanted verified and I put him onto Joel. He called me back and said that Joel told him "I am no longer verifying these cars." The owner of the car has documentation to prove it is one but wanted Joel's verification to add to his paperwork. I tried about 2 weeks ago about another car I found and got the same reply, "I am not verifying anymore cars at this time."
Now if you know something that I don't, then fill me in as I would like to help this guy out and get something on the other car also..............RatPack...........

[sYc]

Do not know what to say, because, as I said, he and I have visited about a couple of "so called" Motion cars recently. Maybe Joel is tired of the BS and is only dealing with folks he knows/trusts. Which, after reading some of the "hate" emails he gets, I really cannot blame him.

[Motion Camaro]

[ QUOTE ]
Make sure you don't have your distributor in 180^ out. I seem to do that every time http://www.yenko.net/ubbthreads/images/graemlins/crazy.gif...

[/ QUOTE ]
<font color="blue">Ed,
No distributor on this setup, crank trigger &amp; coil packs. </font>

[55chevy]

[ QUOTE ]
[ QUOTE ]
Make sure you don't have your distributor in 180^ out. I seem to do that every time http://www.yenko.net/ubbthreads/images/graemlins/crazy.gif...

[/ QUOTE ]
<font color="blue">Ed,
No distributor on this setup, crank trigger &amp; coil packs. </font>

[/ QUOTE ]

ahh. sounds like fun. good luck http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Motion Camaro]

<font color="blue">It's Alive !!!!!

Finally, It's running &amp; sounds great.
The Electromotive is not bad to work with ...
double check everything 5 times &amp; hit the starter ....
Vrrrrooommmm http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif

I'm one happy camper. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif</font>

[budnate]

Vid, Please!!

[55chevy]

We can all expect to see it at SCR8.. Right? http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[Motion Camaro]

<font color="blue">I'm reading the instructions for my Nikon 5700
to use the video mode. http://www.yenko.net/ubbthreads/images/graemlins/confused.gif </font>

[Motion Camaro]

<font color="blue"> http://www.yenko.net/ubbthreads/images/graemlins/smirk.gif SCR8 ... hmmm ... http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif
All I can do is ...

... work faster !!! http://www.yenko.net/ubbthreads/images/graemlins/beers.gif </font>

[budnate]

[ QUOTE ]
<font color="blue">I'm reading the instructions for my Nikon 5700
to use the video mode. http://www.yenko.net/ubbthreads/images/graemlins/confused.gif </font>

[/ QUOTE ]

oh boy..if thats the case just load it up and bring it to the show..the last time you said you were reading a manual you were gone for weeks.... http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[Motion Camaro]

[ QUOTE ]
[ QUOTE ]
<font color="blue">I'm reading the instructions for my Nikon 5700
to use the video mode. http://www.yenko.net/ubbthreads/images/graemlins/confused.gif </font>

[/ QUOTE ]
oh boy..if thats the case just load it up and bring it to the show..the last time you said you were reading a manual you were gone for weeks.... http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]
<font color="blue"> http://www.yenko.net/ubbthreads/images/graemlins/mad.gifTHAT WAS JUST ................. true http://www.yenko.net/ubbthreads/images/graemlins/blush.gif

But this manual is much, much smaller. http://www.yenko.net/ubbthreads/images/graemlins/wink.gif</font>

[55chevy]

How's the Camaro coming along? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[Motion Camaro]

[ QUOTE ]
How's the Camaro coming along? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[/ QUOTE ]
<font color="blue">I ordered the clutch for it &amp; while waiting I am wiring the guages &amp; preppin' for the Dyno.
Checked on insurance with Parrish-Heacock while at the Hot Rod Reunion (convenient),
pretty reasonable (cheaper than the clutch) http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif.
The reunion was great ... you guys shoulda' been there!</font>