1969 Z/28 Restoration Pictures [Archive]

SamLBInj

10-05-2005, 05:51 PM

Here are some pictures of my 1969 Z/28's restoration being done by Rich of Cornerstone Restorations (Formerly PRC)
Starting Point...
http://www.yenko.net/attachments/162729-DSCN0003.JPG

SamLBInj

10-05-2005, 05:54 PM

Trim Tag..
http://www.yenko.net/attachments/162730-DSCN0004.JPG

SamLBInj

10-05-2005, 05:56 PM

More
http://www.yenko.net/attachments/162731-DSCN0015.JPG

SamLBInj

10-05-2005, 05:59 PM

more
http://www.yenko.net/attachments/162733-DSCN0019.JPG

SamLBInj

10-05-2005, 06:00 PM

More
http://www.yenko.net/attachments/162735-DSCN0011.JPG

SamLBInj

10-05-2005, 06:01 PM

More
http://www.yenko.net/attachments/162737-DSCN0010.JPG

SamLBInj

10-05-2005, 06:03 PM

More
http://www.yenko.net/attachments/162738-DSCN0002.JPG

SamLBInj

10-05-2005, 06:04 PM

More
http://www.yenko.net/attachments/162739-DSCN0020.JPG

SamLBInj

10-05-2005, 06:06 PM

More
http://www.yenko.net/attachments/162740-DSCN0012.JPG

SamLBInj

10-05-2005, 06:07 PM

More, Found the cause of the short http://www.yenko.net/ubbthreads/images/graemlins/eek.gif
http://www.yenko.net/attachments/162742-DSCN0016.JPG

Salvatore

10-05-2005, 06:08 PM

Keep them coming. You and Darren can write a book with color pictures. Looks like a pretty nice car already! http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

SamLBInj

10-05-2005, 06:49 PM

More
http://www.yenko.net/attachments/162749-DSCN0008.JPG

DarrenX33

10-05-2005, 06:50 PM

No doubt. Keep posting Sam. I will be glued. Remember to be careful removing the paint from the firewall. Lots of cool stuff under there. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

SamLBInj

10-05-2005, 06:50 PM

More
http://www.yenko.net/attachments/162751-DSCN0021.JPG

SamLBInj

10-05-2005, 06:52 PM

More
http://www.yenko.net/attachments/162752-DSCN0013.JPG

Mr. T

10-05-2005, 06:54 PM

Is this going to be a full frame-off resto Sam? By the way, who is your friend in the driver's seat?

SamLBInj

10-05-2005, 06:55 PM

LT-1..Still not sure about putting the 302 back in thinking of a New LS7 Vette motor....I love Rich's fan sticker! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif I made those custom T-Handle valve cover bolts in metal shop back in Highschool. http://www.yenko.net/ubbthreads/images/graemlins/grin.gif
http://www.yenko.net/attachments/162755-DSCN0018.JPG

Alan X77 Hugger

10-05-2005, 06:56 PM

Looks good!! I which I would have known better when I did mine several years back and documented the reso with pictures like these. I'm sure I destroyed some valuable info. http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

SamLBInj

10-05-2005, 07:00 PM

I am guessing thats Rich's dog...I have no Idea of what were going to find, other than pulling the original motor and trans the car is the way I got it...This may be putting Rich on the spot here by posting his work..Maybe I can put a few online cameras up in his shop and call him if I ever see him slacking off http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

SamLBInj

10-05-2005, 07:02 PM

Here is my secret custom electric fuel pump switch http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif
http://www.yenko.net/attachments/162760-DSCN0017.JPG

DarrenX33

10-05-2005, 07:02 PM

Don't throw out that roof interior light bezel either. Unless there is finally one out there that doesn't melt. http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif

camarojoe

10-05-2005, 07:09 PM

The guy that did that color change from orange to burgundy sure did a thorough job... I barely see a hint of original orange paint anywhere...its even sprayed burgundy under the headliner....

SamLBInj

10-05-2005, 07:18 PM

Yea, Im pretty surprised by that also, you can see a little, but not much..

DarrenX33

10-05-2005, 07:23 PM

Isn't that the primer?

I see the orange in the roof rails and near the bottom quarter window.

SamLBInj

10-05-2005, 07:28 PM

Since im color blind i will have to go on your word http://www.yenko.net/ubbthreads/images/graemlins/cool.gif http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

Mr. T

10-05-2005, 07:32 PM

I agree, I think it is primer. Ok Sam, what's the word on the Code 10 Z of yours? You must have sold your L78?

VintageMusclecar

10-05-2005, 08:12 PM

[ QUOTE ]
More
http://www.yenko.net/attachments/162749-DSCN0008.JPG

[/ QUOTE ]

I'm guessing that would be the shop foreman/supervisor? http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

SamLBInj

10-05-2005, 08:20 PM

[ QUOTE ]
I agree, I think it is primer. Ok Sam, what's the word on the Code 10 Z of yours? You must have sold your L78?

[/ QUOTE ]
You are correct, The JL8 is a done deal but I have to wait for Rob to get back from his duties as an insurance adjuster down south which I would imagine he will be for a while to finalize everything. Im in no rush http://www.yenko.net/ubbthreads/images/graemlins/hmmm.gif...yea, right http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

SamLBInj

10-05-2005, 10:46 PM

My new watchdog.. http://www.yenko.net/ubbthreads/images/graemlins/eek.gif http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif
http://www.yenko.net/attachments/162821-darrendog.jpg

Xplantdad

10-05-2005, 11:02 PM

AHHHHHHHHH! http://www.yenko.net/ubbthreads/images/graemlins/eek.gif What is it?

DarrenX33

10-05-2005, 11:34 PM

Oh that's funny. I love it! I, I, uh, I feel.........

http://www.havelshouseofhistory.com/Manson,%20Charles%20Milles%20Maddox.jpg

SamLBInj

10-05-2005, 11:41 PM

Charley dont chop http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

KevinW

10-05-2005, 11:44 PM

Sam, Another Orange 69! When all of these cars get done, there will be a lot of Orange in NJ http://www.yenko.net/ubbthreads/images/graemlins/smile.gif So how is Rich doing? I lost track of where he moved to, where is his new shop?

Kevin

DarrenX33

10-05-2005, 11:45 PM

What the hell. You've got me, Dennis Gage, Gene Simmons (widows peak) and a dog. Watch it or your seat might be wet when I get up. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

njsteve

10-05-2005, 11:47 PM

[ QUOTE ]
More, Found the cause of the short http://www.yenko.net/ubbthreads/images/graemlins/eek.gif
http://www.yenko.net/attachments/162742-DSCN0016.JPG

[/ QUOTE ]

Looks like rolled up aluminum foil as a fuse. At least they didnt use a 22 cal. bullet! They tend to alert you with a BANG when they pop! http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

SamLBInj

10-06-2005, 12:24 AM

More Picts...
http://www.yenko.net/attachments/162847-DSCN0001%2810%29.JPG

SamLBInj

10-06-2005, 12:25 AM

More
http://www.yenko.net/attachments/162848-DSCN0002%2811%29.JPG

SamLBInj

10-06-2005, 12:27 AM

More
http://www.yenko.net/attachments/162849-DSCN0003%2810%29.JPG

SamLBInj

10-06-2005, 12:28 AM

More
http://www.yenko.net/attachments/162850-DSCN0004%2811%29.JPG

SamLBInj

10-06-2005, 12:29 AM

More
http://www.yenko.net/attachments/162851-DSCN0005%2810%29.JPG

SamLBInj

10-06-2005, 12:30 AM

More
http://www.yenko.net/attachments/162853-DSCN0006%289%29.JPG

SamLBInj

10-06-2005, 12:31 AM

More
http://www.yenko.net/attachments/162856-DSCN0007%288%29.JPG

SamLBInj

10-06-2005, 12:33 AM

One from first batch
http://www.yenko.net/attachments/162857-DSCN0001.JPG

SamLBInj

10-06-2005, 12:43 AM

Thinking of dropping a new LS7 small block vette motor in http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif any comments? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

Hotrodpaul

10-06-2005, 01:41 AM

Is that an X3 code on the rear seat bulkhead?

Paul

kwhizz

10-06-2005, 01:47 AM

[ QUOTE ]
More
http://www.yenko.net/attachments/162749-DSCN0008.JPG

[/ QUOTE ]

Watch out........thay seem to multiply.......Ask Charley.............

Ken http://www.yenko.net/ubbthreads/images/graemlins/flag.gif

Enoch

10-06-2005, 01:54 AM

Yes, that is an X3 code. As far as the shop dog is concerned he's my helper ya see dogs age 7 years to our 1 so i figure that every hour he works on the car I can bill for seven. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif
Rich.

SamLBInj

10-06-2005, 02:32 AM

He is kinda like a mobile dust mop http://www.yenko.net/ubbthreads/images/graemlins/grin.gif http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

Mr. T

10-06-2005, 02:36 AM

[ QUOTE ]
Thinking of dropping a new LS7 small block vette motor in http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif any comments? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[/ QUOTE ]

If I was you Sam, I would slide that original #'s matching 302 back in your Z. Since you are totally dismantling the car for the restoration, and I am sure you will be fully detailing it in every way, it would be a great time to make that Z of yours 100% numbers matching again. Of course this is JMO.

SamLBInj

10-06-2005, 02:40 AM

[ QUOTE ]
[ QUOTE ]
Thinking of dropping a new LS7 small block vette motor in http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif any comments? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

[/ QUOTE ]

If I was you Sam, I would slide that original #'s matching 302 back in your Z. Since you are totally dismantling the car for the restoration, and I am sure you will be fully detailing it in every way, it would be a great time to make that Z of yours 100% numbers matching again. Of course this is JMO.

[/ QUOTE ]
Its always been a day 2 and I will never sell it so I can drop the 302 in anytime so at this point she's going to remain day 2 but well see. I appreciate the opinions and comments good or bad thats why Im putting it all up on the board here for everyone. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

SamLBInj

10-06-2005, 02:49 AM

Since a few of you have asked and Anyone looking to get there car done here is Rich's info for you..
http://www.yenko.net/ubbthreads/images/graemlins/beers.gif
Maybe if enough of you call Ill get the puppy dogs labor at a discount http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif
Rich P.
Cornerstone Auto Restoration
Macungie Pa 610-462-4441

njsteve

10-06-2005, 06:04 AM

BTW, Rich painted both my 69 Z11 and my 70 Hemi Charger. He does very nice work. If I could only get some more funding I'd already have my 72 T/A over there. http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

Seattle Sam

10-06-2005, 08:10 AM

Sam,
This article will give you an idea what it takes, as you probably know the LS motor is not a drop-in.

http://www.carcraft.com/techarticles/116_0405_swap/

PS Steve Heino does good work if you want to bring your car out to the Portland area...

SamLBInj

10-06-2005, 06:12 PM

Thanks Sam, That was an interesting read... http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

Mr. T

10-07-2005, 11:47 PM

As of today, how is your Z coming along Sam? Is it torn down any further, and do you have anymore pictures? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

SamLBInj

10-07-2005, 11:53 PM

[ QUOTE ]
As of today, how is your Z coming along Sam? Is it torn down any further, and do you have anymore pictures? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[/ QUOTE ]
Im putting them up as I get them, Im hoping the body is in good shape..Ive had the car since 1981 and it has never been wet so Im keeping my fingers crossed..Not sure of any history with the car other than I bought it out in Newtown Square Pa. off of a cop who got it off of a kid who was killed in an accident. (Not in the car)...If anyone knows or think they know about this let me know...I have an old title so I can verify anything you can find..

SamLBInj

10-07-2005, 11:56 PM

[ QUOTE ]
As of today, how is your Z coming along Sam? Is it torn down any further, and do you have anymore pictures? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

[/ QUOTE ]
As soon as Rich gets off his lazy ass and back to work Ill post them for you http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif...Im sure that crack will cost me a few extra hours http://www.yenko.net/ubbthreads/images/graemlins/eek.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

Jeff H

10-07-2005, 11:58 PM

Sam, are you going to have the body dipped like mine was? Lots of little dents, holes and assorted panel repairs popped up so Rich replaced it all with NOS metal. If you're confident about the body it could probably just be blasted.

SamLBInj

10-08-2005, 12:00 AM

[ QUOTE ]
BTW, Rich painted both my 69 Z11 and my 70 Hemi Charger. He does very nice work. If I could only get some more funding I'd already have my 72 T/A over there. http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

[/ QUOTE ]
Hey, hey, hey, get in line http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif I feel sorry for Jeff and his JL8, we keep bumping him off the list...By the time he gets his car back all the fossil fuel will be depleted http://www.yenko.net/ubbthreads/images/graemlins/no.gif Still make a pretty cool push cart http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

SamLBInj

10-08-2005, 12:02 AM

[ QUOTE ]
Sam, are you going to have the body dipped like mine was? Lots of little dents, holes and assorted panel repairs popped up so Rich replaced it all with NOS metal. If you're confident about the body it could probably just be blasted.

[/ QUOTE ]
Thats a tough one, Really dont know whats under the paint..How bad was your car to start with?

Mr. T

10-08-2005, 12:09 AM

[/ QUOTE ] As soon as Rich gets off his lazy ass and back to work Ill post them for you http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif...Im sure that crack will cost me a few extra hours http://www.yenko.net/ubbthreads/images/graemlins/eek.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

You know Sam, in those two sentences, you used the words Rich, ass, and crack. Hmmmm.... http://www.yenko.net/ubbthreads/images/graemlins/haha.gif http://www.yenko.net/ubbthreads/images/graemlins/haha.gif

SamLBInj

10-08-2005, 12:14 AM

[ QUOTE ]

[/ QUOTE ] As soon as Rich gets off his lazy ass and back to work Ill post them for you http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif...Im sure that crack will cost me a few extra hours http://www.yenko.net/ubbthreads/images/graemlins/eek.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

You know Sam, in those two sentences, you used the words Rich, ass, and crack. Hmmmm.... http://www.yenko.net/ubbthreads/images/graemlins/haha.gif http://www.yenko.net/ubbthreads/images/graemlins/haha.gif

[/ QUOTE ]
Wow, you seem to be pretty excited about that http://www.yenko.net/ubbthreads/images/graemlins/hmmm.gif I know its your birthday and all but take it easy on the booze will ya http://www.yenko.net/ubbthreads/images/graemlins/eek.gif http://www.yenko.net/ubbthreads/images/graemlins/grin.gif http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

Mr. T

10-08-2005, 12:15 AM

http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

SamLBInj

10-08-2005, 12:16 AM

[ QUOTE ]
http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]
http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

SamLBInj

10-08-2005, 03:34 AM

[ QUOTE ]
Sam, Another Orange 69! When all of these cars get done, there will be a lot of Orange in NJ http://www.yenko.net/ubbthreads/images/graemlins/smile.gif So how is Rich doing? I lost track of where he moved to, where is his new shop?

Kevin

[/ QUOTE ]
Hey Kevin, I posted Rich's address on the thread here...How are you making out with your car and mule?

KevinW

10-08-2005, 06:26 AM

Hi Sam, plans have changed a little, I'm having some health issues taken care of, so I have a little extra time to work on the Camaros. Decided the mule needs a new set of clothes first, so I am tearing the trim off to be sent out this month for much needed paint and body work. I hope to have it back for next seasons cruise nights. The SS will be next with the completion of the body brace. Then next spring when the weather warms it will be time for a dip http://www.yenko.net/ubbthreads/images/graemlins/smile.gif With my Friends orange Z clone, yours, Jeff Hs Z and mine, there will be a lot of orange in the parking lot. http://www.yenko.net/ubbthreads/images/graemlins/laugh.gif

SamLBInj

10-08-2005, 05:37 PM

Nothing like Hugger Orange http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif
I hope everything is ok and its nothing serious.. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

KevinW

10-08-2005, 05:57 PM

Hugger Orange http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif I found original paint on the A pillers, that way we can get the hue just right! BTW, original hugger orange does NOT match Chevy orange engine paint. My friend, who is really talented, is going to take it all winter and do the body work and misc patching and paint in the spring. Then depending on how long it takes me to put the trim back on will determine which cruise night I make. http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

As to health, its serious, but OK. Kidney and prostate cancer, both caught early and 90% chance of total cure without chemo. Kidney was taken out 9/16 and prostate is coming out mid Nov. So I am in-between surgeries and have some time and energy to catch up on projects.

BLOWNALKYCAMARO

10-08-2005, 06:08 PM

Go to your local DuPont jobber they can mix huggar orange in base clear or single stage they have the formula

SamLBInj

10-08-2005, 06:10 PM

[ QUOTE ]
Hugger Orange http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif I found original paint on the A pillers, that way we can get the hue just right! BTW, original hugger orange does NOT match Chevy orange engine paint. My friend, who is really talented, is going to take it all winter and do the body work and misc patching and paint in the spring. Then depending on how long it takes me to put the trim back on will determine which cruise night I make. http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

As to health, its serious, but OK. Kidney and prostate cancer, both caught early and 90% chance of total cure without chemo. Kidney was taken out 9/16 and prostate is coming out mid Nov. So I am in-between surgeries and have some time and energy to catch up on projects.

[/ QUOTE ]

Good luck with everything Kevin, Nothing more important than your health! Cant wait till next summer to see all the nice oranges http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Jeff H

10-10-2005, 12:29 AM

[ QUOTE ]
[ QUOTE ]
BTW, Rich painted both my 69 Z11 and my 70 Hemi Charger. He does very nice work. If I could only get some more funding I'd already have my 72 T/A over there. http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

[/ QUOTE ]
Hey, hey, hey, get in line http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif I feel sorry for Jeff and his JL8, we keep bumping him off the list...By the time he gets his car back all the fossil fuel will be depleted http://www.yenko.net/ubbthreads/images/graemlins/no.gif Still make a pretty cool push cart http://www.yenko.net/ubbthreads/images/graemlins/grin.gif

[/ QUOTE ]

Yeah, get in line, my car gets finished first! http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

MosportGreen66

10-10-2005, 12:36 AM

[ QUOTE ]

Yeah, get in line, my car gets finished first! http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

[/ QUOTE ]

How is the progress coming along on the car?
Any new updates Jeff?

Jeff H

10-10-2005, 12:51 AM

Nope, I think Rich was planning on painting it later this month so we'll see some serious progress after that. I can't wait to see it Hugger Orange again! http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

KevinW

10-10-2005, 06:10 AM

So, Jeff, are your keeping it after the resto? http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

Charley Lillard

10-10-2005, 06:19 AM

No...He is going to sell it back to me....cheap....

SamLBInj

10-10-2005, 04:51 PM

[ QUOTE ]
No...He is going to sell it back to me....cheap....

[/ QUOTE ]
Dont you just love it when a plan comes together Charley http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

Jeff H

10-10-2005, 07:11 PM

[ QUOTE ]
So, Jeff, are your keeping it after the resto? http://www.yenko.net/ubbthreads/images/graemlins/smile.gif

[/ QUOTE ]

I have no idea at this point in time and I won't worry about it until it's closer to being completed. Until then I'll keep playing the lottery! http://www.yenko.net/ubbthreads/images/graemlins/smirk.gif

SamLBInj

11-02-2005, 03:07 AM

More picts, the floor and cowl is in great condition, well see about the trunk in a day or so..
http://www.yenko.net/attachments/168845-DSCN0002%2811%29.JPG

SamLBInj

11-02-2005, 03:08 AM

Next http://www.yenko.net/attachments/168847-DSCN0003%2810%29.JPG

SamLBInj

11-02-2005, 03:10 AM

next http://www.yenko.net/attachments/168848-DSCN0005%2810%29.JPG

SamLBInj

11-02-2005, 03:11 AM

next http://www.yenko.net/attachments/168850-DSCN0006%289%29.JPG

SamLBInj

11-02-2005, 03:12 AM

next http://www.yenko.net/attachments/168851-DSCN0007%288%29.JPG

SamLBInj

11-02-2005, 03:13 AM

next http://www.yenko.net/attachments/168852-DSCN0008%287%29.JPG

SamLBInj

11-02-2005, 03:14 AM

next http://www.yenko.net/attachments/168853-DSCN0009%288%29.JPG

SamLBInj

11-02-2005, 03:15 AM

next http://www.yenko.net/attachments/168854-DSCN0010%286%29.JPG

SamLBInj

11-02-2005, 03:16 AM

Last of this set..
http://www.yenko.net/attachments/168855-DSCN0011%286%29.JPG

SamLBInj

11-02-2005, 03:20 AM

Kevin W asked if there were rivnuts uder the console and there are, original console, ZL2, and D80 car. Looks like somebody along the line modified the shifter hole to fit the shifter.

SamLBInj

11-02-2005, 03:22 AM

I got alot of emails on putting the cost of this up..I dont mind doing that at all. Ill talk to Rich to get a good breakdown for any of you with future restoration projects.

Mr. T

11-02-2005, 03:47 PM

Sam, I think your Z is in great shape actually. The floors and trunk area look solid and free of rust, which is a good sign. I will give you a call in a day or so. I added something new to my stable. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

SamLBInj

11-02-2005, 04:04 PM

[ QUOTE ]
Sam, I think your Z is in great shape actually. The floors and trunk area look solid and free of rust, which is a good sign. I will give you a call in a day or so. I added something new to my stable. http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

[/ QUOTE ]
Cool, a new "Z" i would hope? http://www.yenko.net/ubbthreads/images/graemlins/naughty.gif

drdave69

11-02-2005, 04:21 PM

Sam, did you find anything interesting in the car during the tear down?

Jeff H

11-02-2005, 04:38 PM

On my tunnel under the console was painted in Hugger Orange "Mr Moto". Wait til you see the car after being stripped and cleaned up Sam. It should look something like this.

http://cjcfo.fbody.com/members/[email protected]/JL8/barecar013.jpg

SamLBInj

11-02-2005, 05:50 PM

That looks pretty darn good Jeff, How about starting a thread for your resto with picts? A rare JL8 resto would be pretty cool. http://www.yenko.net/ubbthreads/images/graemlins/cool.gif
Have you been out to Pennsyltuckey yet?

Jeff H

11-03-2005, 02:44 AM

I don't have any new pictures. Most of my pictures available are here:

JL8 resto pictures (http://cjcfo.fbody.com/members/[email protected]/JL8/)

SamLBInj

11-03-2005, 02:52 AM

Pretty cool pictures http://www.yenko.net/ubbthreads/images/graemlins/cool.gif Is thats its present state? Also your going with headers? http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

Jeff H

11-03-2005, 02:55 AM

I haven't seen the car in a long time so I'm not sure where he is regarding the paint. Yes, I'm going with those Stahl headers that look very similar to the dealer sold headers.

SamLBInj

11-03-2005, 02:58 AM

[ QUOTE ]
I haven't seen the car in a long time so I'm not sure where he is regarding the paint. Yes, I'm going with those Stahl headers that look very similar to the dealer sold headers.

[/ QUOTE ]
I may go with those also, what did they cost you?

SamLBInj

11-03-2005, 03:00 AM

On a side note, I took the "New Black Z" out for a spin and cut her loose..Man those 302's are fun http://www.yenko.net/ubbthreads/images/graemlins/tongue.gif http://www.yenko.net/ubbthreads/images/graemlins/burnout.gif http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif

KevinW

11-03-2005, 06:31 AM

Sam, the mule has the same blackout treatment on the front floor as your car. I wonder what is the deal with it?

enio45

11-03-2005, 12:45 PM

Jeff, nice job on the resto...was the metal bead blasted or wire brushed to look like that?

Jeff H

11-03-2005, 04:32 PM

The car was dipped at RediStrip and then Rich and the guys at the shop hit it with wire wheels to clean it up. We found both quarters had lots of little dings, dents, holes and other repairs as well as the rear panel so they were replaced with NOS GM panels.