Aftermarket Aluminum Heads...any advice?

[musclecarjohn]

Just starting the hunt for alloy heads for the 302.Does anyone have any advice as to what they think is best. http://www.yenko.net/ubbthreads/images/graemlins/rolleyes.gifI've been doing alot of research and it looks like it may come down to something from either AFR or Brodix...but which one? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gifAFR makes a 210cc SPEC racing head with a 66cc combustion chamber that would be close to the stock 64cc for around $1995/pr.complete.
Planning on building a roller cam (hydralic)11:0 motor and using my stock LT-1 manifold.

Any suggestions would be welcome. http://www.yenko.net/ubbthreads/images/graemlins/biggthumpup.gif

Thanks,
John

[hapevo]

Hey John,

I have both AFRs and Brodix aluminum heads that are going on two way different projects. AFRs are going on my ZL-1 project. I just ordered a set of Brodix 200cc Race Rites with the CNC chamber option that will go on a stoker 383 SBC with a hyd roller. I have heard the Brodix will out flow the AFR 210 to about .500 lift.

I doubt if you could go wrong with either one of the companies. They both put out an excellent product with many years of experience behind them.

Ross

[musclecarjohn]

[ QUOTE ]
Hey John,

I have both AFRs and Brodix aluminum heads that are going on two way different projects. AFRs are going on my ZL-1 project. I just ordered a set of Brodix 200cc Race Rites with the CNC chamber option that will go on a stoker 383 SBC with a hyd roller. I have heard the Brodix will out flow the AFR 210 to about .500 lift.

I doubt if you could go wrong with either one of the companies. They both put out an excellent product with many years of experience behind them.

Ross

[/ QUOTE ]

Funny,I had hear just the opposite about AFR outflowing Brodix but that's why I'm asking.I have both catalogs and have been waffling back and forth.Brodix makes like 20+ 23 degree sbc heads! http://www.yenko.net/ubbthreads/images/graemlins/eek.gif

What did your CNC race rites run you?

[hapevo]

PM sent.

Ross

[musclecarjohn]

Thanks Ross!