Need 14x6 FC wheels

[mrrec]

Need 1 or 2 FC code 14x6 steel wheels dated late 67 or Jan 68. The original owner of this L78 M22 Camaro kept all 4 wheel covers and two of the wheels (and a bunch of other great stuff) and recently reunited it all with the car. So.......I need a pair of wheels.
Dave

[mrrec]

Oops, forgot that there is no date at the stem on these wheels. So.....any old FC will do.
Dave

[AMANOCC]

They are dated, not by the valve stem, usually about 180 degrees from the valve stem, on the flat that would hold a aftermarket trim ring clip.

[68SSCamaro]

I had a 69 dated FC wheel that was stamped near the valve stem just like a rally wheel. It's the only one I've seen like that.

[mrrec]

Actually, I looked at the orig wheels and they are dated "K-1-8" on one boss between the lug holes and "A" on another with the familiar "GM 65" on still another.
Dave

[AMANOCC]

Martin, whats up, long time no see, your car in paint yet?....yes the later FC got a date in the typical spot, the earlyer ones 67, 68 early 69 got the date where i mentioned....Alec

[JRSully]

There is a set on Ebay right now, if the link doesn't work. look under "copo"


http://cgi.ebay.com/ebaymotors/1969-Cama...053948587QQrdZ1 (http://cgi.ebay.com/ebaymotors/1969-Camaro-Orig-Steel-Wheels-69-SS-COPO-Z-28-RS-67-68_W0QQcmdZViewItemQQcategoryZ6763QQitemZ805394858 7QQrdZ1)

[68SSCamaro]

Hi Alec, haven't been doing much car stuff lately. I'm finally going to start on the car next month after owning it for over 15 years. I got the brakes bled a few weeks ago so I can drive it some before I tear it all apart. Martin