What Aluminum manifolds were available in 1969?

[x44d80]

Does anyone know what aftermarket aluminum manifolds were available in 1969? I know the Edlebrock Torker was around in the late 70's but I was only 10 years old in 69 and I don't have a stash of old magazines. Thanks for any help.

[Born30YrsLate]

I believe the Edelbrock C427 and perhaps the Edelbrock C427X as well...

[396L35]

Dont forget the C396 for the oval port cars...

[Keith Tedford]

The C427X is very similar to the L72-L78 intake and flows similar numbers from what I have been told. The Tarantula small block intake came out around this time with some pretty wild power gain claims. Check out some of the old magazines. Weiand and Offenhauser made aluminum intakes as well.

[JoeG]

The nice thing about the Tarantula manifold, because of the angled setup of the carb--the runners were equal in distance and you didn't have to stagger the carb jetting --Made for smoother idle and tacked on a couple of horses over a stock L-78/L-72 GM manifold....I ran one for a few years in the 70's---one of the best I've used..

[Hank Williams Jr]

I think this is a great question! I have often thought of doing a project, and building it like I might have done it, had I been alive back then.

Is this why you asked yourself?

BTW. New to the site. seems great.

[Schonyenko2]

Well Bocephes, had you not been drinkin, and rollin smoke, maybe you'd remember. Ah, yes. I know. It's a family tradition. http://www.yenko.net/ubbthreads/images/graemlins/grin.gif http://www.yenko.net/ubbthreads/images/graemlins/beers.gif Welcome to the site.

[musclcar]

here's a few :

edelbrock TR1-X tunnel ram for sbc

edelbrock TM-1 for sbc

http://www.yenko.net/ubbthreads/images/graemlins/3gears.gif http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

[Hank Williams Jr]

LOL! Family Tradition is one of the best!

I always pictured a build something like this: totally stock resto, throw on a pair of period correct aft mkt wheels, an intake, possibly some valve covers, and maybe headers. A couple vintage decals rounding out the look.

Were Sun tachs available in 69?

[396L35]

[ QUOTE ]
LOL! Family Tradition is one of the best!

I always pictured a build something like this: totally stock resto, throw on a pair of period correct aft mkt wheels, an intake, possibly some valve covers, and maybe headers. A couple vintage decals rounding out the look.

Were Sun tachs available in 69?

[/ QUOTE ]
Yes Sun tachs were available in 1969... They had the SST 709, 801, 802, etc... Mark

[x44d80]

I had a Edlebrock C3B which looked alot like a stock Z28 manifold but I traded it. I'd really like to know if anything current from Offy or Weiand was available for the SB back in 69. I like the wheels idea, I had some Ansens and some Appliance SS knockoffs in the 70's with N50 rears, jacked up with hijacker shocks and monoleafs, it rode like a covered wagon. Oh yeah baby!

[Hank Williams Jr]

[ QUOTE ]
I had a Edlebrock C3B which looked alot like a stock Z28 manifold but I traded it. I'd really like to know if anything current from Offy or Weiand was available for the SB back in 69. I like the wheels idea, I had some Ansens and some Appliance SS knockoffs in the 70's with N50 rears, jacked up with hijacker shocks and monoleafs, it rode like a covered wagon. Oh yeah baby!

[/ QUOTE ]

Oh Yeah!! Your preaching to the choir buddy!

What are you building exactly?

Someone here suggested old magazines for reference and ideas, which is a great idea, anyone noticed how much they are going for at the swap meets these days!