Need correct TCS rivets/brads for L78 Nova??

[JHS]

What are the correct or acceptable rivets or brads used to mount the TCS to the firewall wiring harness gutter on a 1970 L78 Nova? The assembly manual shows the solenoid attached to the rubber gutter with either rivets or something like them. Any suggestions? I assume the Nova in question requires the TCS system??

[@wot]

Try this site
http://www.chevynova.org/

I think he has images showing the different variations.

[SS427]

From what I recall, they are the same as those used on the Chevelle and I found the exact ones at my local hardware store in the "Sharon Hardware" pull out trays. It requires a special tool to "roll" the back side of the rivet but they can improvised. The ones I found are dead ringers and are simply a pan headed, hollow neck rivet. I can try and take some pictures later tonight.

Here is the link @wot was talking about.
TCS mounting variations (http://www.chevynova.org/1970TCSRelay.html)
Rick

[JHS]

Thanks Rick and Dean for your help.

[bigchevydaddy]

Nova Research Project says they have the rivets and plugs available... give them a shot.

Good luck, BCD.

[YENKO DEUCE REGISTRY]

I got mine from Greg, look great!