Fuel & brake line clips

[VintageMusclecar]

for my `67 Chevelle--does anyone offer the correct clips with the correct olive green color, or am I stuck with painting whatever is commonly available?

AMK products? http://www.yenko.net/ubbthreads/images/graemlins/dunno.gif

Lastly, who offers the best quality mild steel fuel & brake line kits?

Thanks.
Eric

[m22mike]

Eric
I use alot of fine lines stuff.http://www.finelinesinc.com/ And there local for me. Wandsworth OH. I have only used there SS lines, never used there steel, but they have them.
I just got a SS set from the in SS for a Nova project, there telling us that they are using a softer SS that should seal up better. I have not got the fuel or brakes operational yet so I can't comment.
I have always found ther lines to be A-1.
Mike

http://www.finelinesinc.com/

[allcamaro]

I buy repo clips from right stuff and inline tube but they are not 100% correct and the colors are way off. I will normally glass bead them and re paint, you can buy the correct color from most anywhere. If you dont know the correct colors Im sure i have some originals I can send picks of.

[CamarosRus]

I recommend lines from www.rightstuffdetailing.com (http://www.rightstuffdetailing.com)
out of Sunbury,Ohio (Columbus area)

[3macs1]

Hi Eric:
Let me know if 67 Chevelle uses the same dual like clip as the impala. These are nos gm.If so I maybe able to point you in the right direction to get these.
http://i65.photobucket.com/albums/h215/JoesCars/100_3238.jpg

[VintageMusclecar]

Joseph;

Those are close, but not quite. http://www.yenko.net/ubbthreads/images/graemlins/frown.gif

To follow are a few pics of my originals which were unfortunately disposed of during the chassis powdercoat session. (I didn't think there would be any problem obtaining new replacements, so I wasn't concerned with holding onto the originals)

These are pics of the brake and fuel line clips on the pass. side of the frame just behind the front tire.

Please forgive the quality of the pics, they're blown up clips from larger pics, so they're a little bit grainy.

http://www.yenko.net/attachments/303061-fuellineclips.jpg

Eric

[VintageMusclecar]

Brake line clip at the end of the rocker rail of the frame.

http://www.yenko.net/attachments/303062-brakelineclip1DSrear.jpg

Eric

[VintageMusclecar]

Just forward of the previous one.

http://www.yenko.net/attachments/303063-brakelineclip2DSmiddle.jpg

Eric

[VintageMusclecar]

On the center support brace, middle of the DS frame rail at the body bushing location.

http://www.yenko.net/attachments/303064-brakelineclip2DScentersupport.jpg

Eric

[VintageMusclecar]

Last one, drivers side front of the frame just behind the tire.

http://www.yenko.net/attachments/303065-brakelineclipDSfront.jpg

Eric

[MosportGreen66]

Eric,

If its any help, Long Island Corvettes makes the talc green paint you're looking for. Just make sure you have a part number ready before you call... http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif Otherwise you're in for it. http://www.yenko.net/ubbthreads/images/graemlins/no.gif

-Dan

[rubbinisracing]

[ QUOTE ]

If its any help, Long Island Corvettes makes the talc green paint you're looking for. Just make sure you have a part number ready before you call... http://www.yenko.net/ubbthreads/images/graemlins/scholar.gif Otherwise you're in for it. http://www.yenko.net/ubbthreads/images/graemlins/no.gif


[/ QUOTE ]

Amen! I order from them about once a month and now I do it on the web at www.licorvette.com (http://www.licorvette.com) just so I don't have to have that conversation!

[olredalert]

-----Mike,,,When did Finelines move to Wadsworth??? Last I knew (admittedly 4-5 years ago) they were around the corner from my families hardware store in Medina. Used to go there when visiting...........Bill S

[m22mike]

Not really sure, it's been more that a few years.
Mike

[VintageMusclecar]

Thanks guys. http://www.yenko.net/ubbthreads/images/graemlins/beers.gif

Eric