67 68 BB Muncie shifter stabilizer rod [Archive]

68SSCamaro

12-24-2007, 04:20 AM

I picked one up but I'm not sure if it's the right one. Does anyone have one with exact measurements? This one has about 1/4 inch bend. Overall length is 9 inches. If you measure from the integral hex nut to the slot, it's 5 3/8 inches. The SB Muncie stabilizer I have measures 6 inches. This seems to make sense with the BB setting back further than the SB and the cross-member where the shifter mounts staying in the same location.

Would love to know if I finally got the right piece to complete my shifter.

NCGuy68

12-24-2007, 11:03 PM

Martin,

The overall lenght is 10.5 inches. From the hex nut to the slot is approx. 6.5 inches. The off-set (bend) is approx. 7/8 inch. The BB rod and linkages are very hard to find. I restored OEM Muncie shifters for many years but no longer do it. However, I have kept tracings of the various rods, shafts and levers for reference.

Hope this helps.