Exhaust clamps

[firez]

I just recieved the correct clamps for my 68 Z. It there anything they can be coated in so they will not rust?

[Mr70]

I highly recommend using this. BoeShield (http://www.boeshield.com/t9info.htm)
You can now buy it at SEARS or Burlands House Of Tools over here.
Click their webpage at the bottom to find your local dealer.

[firez]

How does it take the heat from the exhaust?

[Mr70]

It does not seem to be a factor at all with mine.

[firez]

Thanks i will look for it up here in Ontario. Sounds like what I need to keep them in good shape.

[TXZS]

This past July, I put a new Gardner exhaust system on my '69Z and treated it with Boeshield. In August, I drove the car to a local show in a neighboring town about 20 miles from my home. On the way back, I got caught in an unexpected rain shower. A week or so later, I gathered up enough courage to put the car on a lift and take a look. Although there was light surface rust on all the unpainted suspension parts, there was absolutely no rust on the exhaust. I am a believer!

[CamarosRus]

Rick, Are not the GARDNER Exhaust pipes fabricated from Aluminized Tubing, where as rust in the short term would not be a problem anyway......

Below is Jack Seymours GARDNER system below........

http://img.photobucket.com/albums/v470/CamarosRus/Seymour70Z28/119772377.jpg

[CamarosRus]

http://www.boatersworld.com/product/179450028.htm

Boeshield Source.............

[RamAirDave]

Boeshield will not hold up on the exhaust manifold bolts, but that's a much higher heat range than the rest of the exhaust system.

Unless you have the bare steel clamps/hangers, it shouldnt really need anything.