1968 z28 manual steering

[firez]

How you adjust a manual steering box to make the steering a little tighter? Thanks

[StriperSS]

There's an adjuster screw on the top of the box, inside a nut. You loosen the nut slightly, and with an Allen wrench, tighten the screw, no more than 1/8 of a turn. Then retighten the nut without tightening the screw. It's a 2 hand job.
It's there to compensate for wear. Any more than that and you'll need to rebuild.
http://i27.photobucket.com/albums/c155/StriperSS/Misc/0707300001.jpg

[firez]

thanks I will give it a shot