Re: Dragmaster International Wheels
 

I believe they would work just fine.

Re: Dragmaster International Wheels
 

SK...I have the wheels. The guy that had them did not measure the right way. They are 15x6, with 2 7/8 backspace. They clear the 4 piston calipers. One has some small curb rash. All have old mounting compound on them. They will need to be cleaned and painted. No lugnuts and 2 caps missing. All lug holes and cap holes are good. Do you know what the backspace is on the Atlas wheels? It looks like these will fit pretty good. Now I need to figure out some tires. Any suggestions?.Thanks...

Re: Dragmaster International Wheels
 

I am using 215/70/15 TA's

Re: Dragmaster International Wheels
 

Paceme...Thanks. Do you know of any other brand of caps that will fit? I tried the TTD ones, and the bolt pattern is different. Thanks.

Re: Dragmaster International Wheels
 

Caps for vintage americans fit. The only caps that have an oddball bolt pattern are the caps for the new style torq thrust D's. Virtually all of the vintage 5 spoke torq thrust copies used caps with the same hole pattern for the 5 attaching screws. You can buy brand new chrome plated plastic ones on ebay for around 30.00-40.00 for a full set.

Re: Dragmaster International Wheels
 

Thanks Joe. I will look around.

Re: Dragmaster International Wheels
 

I found a new set. Belair, TTT had them. Thanks everybody that responded.

Re: Dragmaster International Wheels
 

https://www.yenko.net/ubbthreads/imag...iggthumpup.gif