Re: COPO BE rear on craigslist
 

http://www.troll.me/images/crazy-eye...good-to-me.jpg

Re: COPO BE rear on craigslist
 

Wow, that is a bad disquise, hammer dents and stamp.....lotta red flags.
I wonder whats under the cover ?
There is definately a curved letter under the E...a U or C or ?

The font looks right on , but the position of the E is terrible.....
jmo...I'd pass, if I needed a real one I'd contact Enio...or Chuck

Re: COPO BE rear on craigslist
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: L78steve</div><div class="ubbcode-body">Looks like a BS stamp to me. </div></div>i take it back. It's a former S as steve says, not an F.

Re: COPO BE rear on craigslist
 

Or BL

Re: COPO BE rear on craigslist
 

Ive had a BV rear with 519 date before. The V almost looks still visible under the E now that I look at it again.

Re: COPO BE rear on craigslist
 

The other fishy thing is the placement of the eaton posi single &quot;E&quot; under the main stamp, I have never seen one that far from apporximate center

Mike

Re: COPO BE rear on craigslist
 

Doesnt the BE rearend have straight axle tubes from the carrier to the axle flange whereas the BV and other lesser 12 bolts have a taper in the last 1/2 inch or so at the rear side of the flange where the backing plate bolts are. I always thought BE 12 bolts had the larger Full Sized (Impala) etc outboard axle bearings and larger carrier bearings also? I know there was no pic of this area but can someone tell a BE by external appearances besides the stamping. Ive read the gears are heat treated also. Can anyone shed any light on this? Just curious Thanks

Re: COPO BE rear on craigslist
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: m22mike</div><div class="ubbcode-body">The other fishy thing is the placement of the eaton posi single &quot;E&quot; under the main stamp, I have never seen one that far from apporximate center

Mike </div></div>

Mike I agree with you. I'm betting it started life as a BL 307 non posi and the E (Eaton ) was added as well.

Re: COPO BE rear on craigslist
 

Same 12 bolt housing.

Re: COPO BE rear on craigslist
 

The tapered tubes or not mbx' is thinking of is actually a JL8 thing.
I forget which is what but believe tapered or not indicates factory installed JL8 units compared to over the counter service parts.

Back to the bogus BE, is the 'stamping' not done w/ acid...a Timothy Leary follower perhaps?
Note the craters you can see when looking closely, again similar work to some altered pads and stampings we've looked at here before.
[img]<<GRAEMLIN_URL>>/beers.gif[/img]
~ Pete