The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Lounge (https://www.yenko.net/forum/forumdisplay.php?f=87)
-   -   1967 Z/28 MO bare block (https://www.yenko.net/forum/showthread.php?t=75006)

lowmile 11-10-2003 11:45 AM

1967 Z/28 MO bare block
 
It's a 2nd week of December 1966 302 MO bare block. He told me he would sell it but it would not be cheap. Any ideas on what I should offer? He will not put a price on it. Mark

resto4u 11-10-2003 12:30 PM

Re: 1967 Z/28 MO bare block
 
Is there a vin# on that block? It could be one of the first 25 built, if it is real. Roger

Salvatore 11-10-2003 08:08 PM

Re: 1967 Z/28 MO bare block
 
Is it standard bore? Does it mag ok? Remember the MO is just a suffix code. That block is really no better than any small journal 327 block.I believe they are all 2 bolt mains. Also if the date isn't correct for your application,you might as well wait till you can get a correct dated block. If everything checks out I guess it is worth 700-800 maybe the guy that owns the car it came out of will give you more. JMO.... Sam [img]/ubbthreads/images/graemlins/grin.gif[/img]

lowmile 11-11-2003 12:57 AM

Re: 1967 Z/28 MO bare block
 
Casting # 3892657
Casting Date L166
Front Pad 7N172639 V0105MO


Salvatore 11-11-2003 01:33 AM

Re: 1967 Z/28 MO bare block
 
All 1967 Z/28's used that block along with the 1967 327 and the 350. This info. came from Jerry MacNeish's book. I forgot that the early 350's were small journal. Good block to have. Standard bore? Early Z! What do they want for it? Sam [img]/ubbthreads/images/graemlins/beers.gif[/img]

Denis 11-11-2003 01:44 AM

Re: 1967 Z/28 MO bare block
 
You could check with Jerry MacNeish (who operates the 67 Z28 registry) to see if the car is known, based on the partial VIN.

rafbody 11-11-2003 12:28 PM

Re: 1967 Z/28 MO bare block
 
The 67 350's did use the same casting block but they were large journal. Chevy never made a small journal 350.

Russ

Salvatore 11-11-2003 03:19 PM

Re: 1967 Z/28 MO bare block
 
You are right about that. I thought that the early 350's were small journal, but I was wrong. Same block casting, but large journal. What made me think that it was small journal was the 302's and the 327's were small journals. I guess Chevy casted 2 blocks. Also correct me if I am wrong. How about the chevy 11 blocks they were also different. Spin on filters or cannister filters? Help me. Sam [img]/ubbthreads/images/graemlins/dunno.gif[/img]

JoeC 11-11-2003 04:54 PM

Re: 1967 Z/28 MO bare block
 
some early V8 Nova blocks had filter and clutch piviot in different location and these block are hard to find

Salvatore 11-11-2003 09:05 PM

Re: 1967 Z/28 MO bare block
 
Not sure when they started spin on filters across the board. 1965? [img]/ubbthreads/images/graemlins/dunno.gif[/img] sam


All times are GMT. The time now is 05:14 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.