LS6 Chevelle build sheet fun fact.
 

While pulling the inner fenders on my LS6 Chevelle I found another build sheet. There was one on each front fender. They were glued on and held on with one nut from the SS 454 emblems. When I pulled the emblems off there was still a tiny circle of build sheet under the nut with the stud poking through. This is a Leeds Kansas built car. http://members.aol.com/clill8567/build/

Re: LS6 Chevelle build sheet fun fact.
 

COOL> there in nice shape to. Wish i was thet lucky

Re: LS6 Chevelle build sheet fun fact.
 

Great picture. I bet everyone wishes they were that lucky!

Re: LS6 Chevelle build sheet fun fact.
 

Some guys have all the luck! Congradulations Charley!


Jason

Re: LS6 Chevelle build sheet fun fact.
 

Thanks...Actually it has either 3.2 or 4.2 build sheets. I have one and part of a second one that both came out of the back seat. There is still even another one still in the hog rings in the back seat. So either it had three in the back seat or the .2 is part of the one that is still there. So apparently the build sheets on the front fenders got glued to them prior to Emblems being attached.

Re: LS6 Chevelle build sheet fun fact.
 

Very cool!! Maybe my build sheet is still hiding somewhere.

Mike

Re: LS6 Chevelle build sheet fun fact.
 

Charley, Does this LS6 have Malibu or SS door panel emblems?

Re: LS6 Chevelle build sheet fun fact.
 

Charley,
I'm happy to find just part of 'one' much less a trifecta of build sheets.
ssl78, also found a build sheet in the fender of his 1969 L78 Rag M22,Rosewod wheel
Chevelle.
The strangest place I have found one on a 1970 Chevelle SS ,was under the tar like carpet underlayment, under the dirivers side
front floor pans. It was very well preserved
since the pans had not rusted and it was place in face up.
This was also a Kansass Built car.

Re: LS6 Chevelle build sheet fun fact.
 

Malibu door panel emblems.

Re: LS6 Chevelle build sheet fun fact.
 

Charley thats a Hoot!
Wierdest place I ever found a 1970 Chevelle SS Buildsheet, was in another Chevelle!
Seems the boys on the line did sometimes put a cars buildsheet in the one in front of or behind it on the line.

Re: LS6 Chevelle build sheet fun fact.
 

mr70,
Found two broadcast sheets for 1969 Super Bees in the same fashion, one for my car and one for the car a few vins prior.
Both were just base 383 Bees.
Also an associate just found a broadcast sheet for a 1970 W30 behind the drivers bucket seat back cover.

Re: LS6 Chevelle build sheet fun fact.
 

Charly what a great story thats the first time I heard of one mounted there my LS-6had three the third was on the pass door panel jeff

Re: LS6 Chevelle build sheet fun fact.
 

Under the carpet underlayment is where I found one about a month ago on the 70 Judge Conv. that I am painting now. Drivers side. If I am not mistaken someone has found one there for a 67 Z also. Very good cond. but stained from the tar. there were also about 25 trim screws inbedded in the tar underlayment I think I will document the position so as to make the car exactly as original along with the paint run in the door jamb.