trunk spatter paint
 

Anybody ever use this stuff? Any good?

I used that on my car. Send me a pm with your e-mail & I'll send you some high def pictures...Joe

Contact OneStopRestoration on here...AKA Rick Burlage.
His Father John,has first hand knowledge in trunk paint too.

I think the John Berlage stuff is this:

https://www.opgi.com/trunk-panels-ac...t-ch26946.html

shoot a black epoxy primer down first. I used a pressure fed paint gun from Harbor Freight. Just looked and its not there anymore. Its like htis one:
https://www.amazon.com/VEVOR-Lightwe...7&sr=8-20&th=1

There are several threads on this forum about the trunk spatter paint.

John Burlage does not sell to individuals anymore, so you would need to get it thru a distributor. Looks like it's still out of stock at OPGI and most places I checked. A couple months ago, I tried to buy the Parts Place paint and couldn't get any of that either. I ended up calling Camaros Plus, in CO and got a quart of his paint for my '67.
He recommended and I bought a spatter gun by PMT on Amazon. It has an adjustable nozzle to spray the base coat and then open it up to replicate the spatter.
https://www.amazon.com/PMT-RA1-T-Und.../dp/B00CBIJT42

Thanks for the help guys :-)

On a side note,Tom Rightler doing it here recently.