Cowl Flapper Actuator position
Can someone help a newb on how a 69 Camaro cowl hood flapper actuator is oriented the assembled properly? I see that the flapper frame bolts in from the windshield side and the actuator lines up with the round hole on the underside/back of the hood. From photos of restored cars I see that the solenoid wire goes through a rubber grommet that fits in that hood hole. Which direction does the actuator spade point? up/down/pass side/drriver side?
|
Straight down so that it will line up with the harness through the grommet in the hood.
|
Many questions can be answered by acquiring a copy of the factory assembly manual.
http://www.drclassic.com/catalog/Camaro/Book |
Or download it for free..
http://www.camaros.org/forum/index.php?topic=9433.0 FYI CRG has chock-full of useful information. http://www.camaros.org/index.shtml http://www.camaros.org/forum/ |
Thanks all! That should keep me out of trouble for a while!
|
All times are GMT. The time now is 01:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.