69Z stock cam
Im rebuilding a 69Z 302 motor and was wondering what cam people are putting in for the stock performance - or maybe a slight improvement. Car currently has a new off road cam/cross ram installed, and we are taking that out and going to a more stock performance and driveability.
thanks for the thoughts |
Re: 69Z stock cam
Manifolds or headers?
|
Re: 69Z stock cam
Eric, ill be running stock manifolds, no air pump, stock intake and carb (the one u just did for me) , as well as the dist.
|
Re: 69Z stock cam
If it's going to be a driver and not a hot rod, I'd give the `70 3972182 LT1 cam strong consideration over the factory `69 3849346 cam.
3972182 camshaft I can help you with anything you might want from Crane, just send me a PM. |
Re: 69Z stock cam
I thought 70 LT-1 would be 3972178
Are those numbers interchangeable? |
Re: 69Z stock cam
it will be a driver - with a very nice resto.....
lynn, not sure on the number interchange?? |
Re: 69Z stock cam
does the 182 cam still have the nice 30/30 sound as well?
|
Re: 69Z stock cam
I believe the 178 cam is the 1970 version. The 182 Crane that Eric talks about is a real good cam kit for your application. Remember Fast, with manifolds you will NOT get that tinny, kinda pinging sound you will get with headers.
|
Re: 69Z stock cam
Not sure what the anomaly is re: the part #'s, that's just the number Crane uses for the LT1 cam now.
|
Re: 69Z stock cam
I'd vote for the stock LT1 cam as well. [img]<<GRAEMLIN_URL>>/biggthumpup.gif[/img] But then, I'm biased! [img]<<GRAEMLIN_URL>>/grin.gif[/img]
|
All times are GMT. The time now is 09:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.