The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   Authentication needed (https://www.yenko.net/forum/showthread.php?t=149987)

Dicky 07-24-2018 08:57 PM

Authentication needed
 
2 Attachment(s)
I'm looking for authentication on these Block stampings.

It's a 1970 Z28 350 with a four speed trans.
What I want to know from some of you experts is if you
think there has been any foul play with it.
The VIN is 514353 and is correct for the car.
Could it be just a bad stamping from the factory??

I appreciate the help. DH:flag:

I'm adding this information: It is a Van Nuys car.
There does not appear to be any stamping near the oil filter on the casting.
The date code at the left rear of block by the casting number is a clock with "T" at the twelve o'clock position and the clock hand pointing at "6" o'clock, I have photo but to large to attach. DH

fiveforty 07-24-2018 10:31 PM

In the top pic you really cant see the broach marks and the block appears to have been lightly decked or surfaced at one time. As far as the stamp not to familiar with the second gen.

WorkinProgress 07-24-2018 11:15 PM

My 05B built Norwood car CTB engine has the VIN by the oil filter.

- Warren

Fast67VelleN2O 07-25-2018 01:01 AM

Looks like someone got out the sandpaper to see the stamping and ruined it.

ronzz572 07-25-2018 01:10 AM

Quote:

Originally Posted by Fast67VelleN2O (Post 1409126)
Looks like someone got out the sandpaper to see the stamping and ruined it.

I agree^ If it's a Van Nuys California car. It's not unusual to see the vin stamping on the pad. It looks like it was lightly decked. And Maybe doctored a little to bring it back. Also sanded.

x77-69z28 07-25-2018 01:41 AM

Looks like the block has been decked to me. What's left looks good to me. I can make out an "L" in the partial vin.
Buddy

L16pilot 07-25-2018 12:10 PM

I do not see any information in your post regarding the block casting date and body (trim tag) info. Since the engine assembly month is all but obscured, it would be important to be sure the casting date, engine stamp and body build week align. I agree the block appears to have been decked but even partial info can be very useful...but the info available must be in alignment.

Jonesy 07-25-2018 05:44 PM

I think the stampings are legit and that the block has been decked which almost totally got rid of them

Dicky 07-27-2018 11:32 AM

Thank you
 
Thanks to all who responded to my inquiry, at this point I'm satisfied about the stampings.

Dicky:flag:

:youguysrock:

BCreekDave 07-27-2018 12:20 PM

A 514353 VIN would be a 5th week of March build for a Van Nuys car. Does this seem correct for the casting numbers and the rest of the car? The block casting should be an early to mid-March timeframe.
Check the Second Gen registry for more info here:
http://www.camaro2ndgenerationregist...-registry.php#

There is a 514329 that is close.


All times are GMT. The time now is 01:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.