help identifying a couple of parts please?
14 Attachment(s)
Hi Gang, found some parts and wanted to know if anyone can assist in identifying...
first is a chrome single snorkel air cleaner lid - stamped "front" on top. second is a trap door oil pan - not sure it's SBC and it's been extended / welded to create a deep sump, not unlike the GM Performance OTC BBC pans that we've all seen (3879633). Driver side dip stick. Is this a SBC pan? The bolt pattern looks different, there's reinforcements in each corner. Is it a GM pan / is it aftermarket or a modified pan / one of a kind. Looks almost homemade too. That windage tray was found with it. Any help is appreciated of course. Thanks everyone! Anthony |
oil cap extension
4 Attachment(s)
Also found this oil cap extension - clearly NOS and the cap at least looks like original GM - with the "S" stamp for Stant I believe. Both have screw in fittings. Is this a GM piece?
Thanks again Gang! Anthony |
I believe the oil cap extension may be 389 Pontiac with A/C. That is just from memory so I could be off.
The air cleaner may be the same application. Jason |
I think the air cleaner is 64 GTO
|
Windage tray looks like a 64/65 Corvette 327/365 HP, except the hole doesn’t look that familiar
|
All times are GMT. The time now is 03:21 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.