Wanted: small parts for my 69 Z
 

Anybody possibly have a spare original used junction block with nut and maybe the wire clip/clips to attach the wire harness to the engine side heater box? Looking for these for my driver car. Currently using reproductions but would like to replace with oem if possible.

Thanks guys.

Re: Wanted: small parts for my 69 Z
 

I am pretty sure I have one of each Gary.

On the wire clip, you are talking the metal clip attached with one of the heater box nuts, correct?

Might be a few days before I dig out the box with elect stuff.

Send me a PM to remind me.

Re: Wanted: small parts for my 69 Z
 

Anyone have these small parts?

Re: Wanted: small parts for my 69 Z
 

I know when the car came with AM/FM that wire was routed down and under the heater box with a noise suppressor in line. AM only, it is routed over the heater box. No noise suppressor. I left a clip on the top of my heater box (no wire in it) even though I have AM/FM. Can someone confirm whether the clip was left there (on top) when AM/FM was installed?

If that clip isn't left there for am/fm apps, then I will let Gary have it.

Gary, I haven't even found my box with the extra wire harnesses and parts. It must be in the shed. If I have a junction block, that is where it would be.

Re: Wanted: small parts for my 69 Z
 

Thanks Lynn. When you get time is fine. Mine is an AM radio car. There are 2 of those clips actually, so I'll need both if you have 2 or maybe somebody has 2 they don't need. Here is a pic that a member, Bentley, on the CRG site posted to verify what was on the 69 AIM. Thanks guys.


https://www.yenko.net/ubbthreads/pics...-wireclips.jpg

Re: Wanted: small parts for my 69 Z
 

I need both heater box clips also if anyone else has them ,take care of Gary first.
Thxs,
Mike

Re: Wanted: small parts for my 69 Z
 

Still looking. Anybody have any spares laying around?

Re: Wanted: small parts for my 69 Z
 

Anyone else have AM/FM?

If so, please look at the 4th post.

Is that clip normally removed when they reroute for the capacitor?

Re: Wanted: small parts for my 69 Z
 

Lynn, I'm willing to bet even with AM and AM-FM there may be 2 clips used for both. Kind of weird nothing has come up from anyone here that does restoring or whatever for a living. Both mine were missing when I bought my car, maybe those got tossed when the cores got changed out.

Re: Wanted: small parts for my 69 Z
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lynn</div><div class="ubbcode-body">Anyone else have AM/FM?

If so, please look at the 4th post.

Is that clip normally removed when they reroute for the capacitor?

Lynn
The routing is in the assy. manual, upc U63 sheet A5. It does point out the existing clips, and they were most likley on there from Fisher body. My guess is the clip was not removed when the capacitor was used.
Below is a 68 car, but I did not capture all the heater box. [img]<<GRAEMLIN_URL>>/cry.gif[/img]

Mike

</div></div>https://www.yenko.net/ubbthreads/pics...8-dscf7581.jpg
https://www.yenko.net/ubbthreads/pics...0-dscf7579.jpg