The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Dick Harrell (https://www.yenko.net/forum/forumdisplay.php?f=128)
-   -   RogerD's 1969 Dick Harrell Chevelle (https://www.yenko.net/forum/showthread.php?t=106287)

Dave Rifkin 08-18-2009 03:30 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
That car must have been beautiful when it was new; it's a shame someone had to paint it a different color and change the interior.

RogerD 08-18-2009 03:39 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
It was beautiful indeed!

The photo shopped picture (posted at the beginning of this thread on how the car looked in 1969) shows how my car looked the day I bought it new.
The SS hood and wheels plus the large Chevy crossed flags & one Harrell emblem on thed eck lid.
There were no SS emblems (other than the wheels) on the car . . .

Several friends around my home town (Plattsburg, MO) rode in this car, a few friends with (hot cars) saw the tail lights when we met for impromptu "drag races" at our favorite flat stretches (Hwy 33, a few miles South East of Plattsburg or Hwy 116 at the West edge of Plattsburg).

Mr70 08-18-2009 05:03 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
Welcome.
By chance have you located the original Buildsheet from under the backseat,carpet or door panels?
Do you have any Bill Allen Chevrolet specific documents for it as well?
It looks like it coulda been delivered from the factory to Bill Allen Chev.as a Super Sport,before being sent to DHPC where it was doctored down,(SS body emblems removed),to be a "sleeper" of sorts and have the 427cid.installed,among other items.
Do you remember if the tail panel was blacked out when you got it?
Good for you for obtaining it back.


SuperNovaSS 08-18-2009 07:43 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
Is the rearend still under the car? If so, what is the code?


Thanks,


Jason

RogerD 08-18-2009 08:14 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
Original 12 bolt rear end with 4.10 positrack gears is gone - has a 10 bolt installed now . . .

RogerD 08-18-2009 08:21 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
2 Attachment(s)
Do not have a build sheet at this time . . .
Will pull the gas tank and rear panels when time permits to see if by some stretch one might be there . . .
Original front bench is long gone . . .
Posted a scanned image of the DHPC 'window sticker' and Bill Allen Chevrolet "Customer Invoice" in the previous pages . . .
Also have the original Owner Manual and 12/12 - 5/50 warranty brochure that were delivered with the car . . .


Quote:

Originally Posted by Mr70 (Post 1044343)
Welcome.
By chance have you located the original Buildsheet from under the backseat,carpet or door panels?
Do you have any Bill Allen Chevrolet specific documents for it as well?
It looks like it coulda been delivered from the factory to Bill Allen Chev.as a Super Sport,before being sent to DHPC where it was doctored down,(SS body emblems removed),to be a "sleeper" of sorts and have the 427cid.installed,among other items.
Do you remember if the tail panel was blacked out when you got it?
Good for you for obtaining it back.


Mr70 08-18-2009 09:00 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
I was just wondering if you had anymore then what you already posted,to show what it was assembled as from the factory,before being sent to DHPC.
Neat stuff for sure.
Check under both backseat cushions too,as most Kansas-Leeds assemblies have had their buildsheets found there,secured with a hog ring against the springs.
Under the carpet,then both doors & rearside panels too,and even under the rear package tray speaker cardboard,while you have the backseat out.

69Tom 08-18-2009 10:23 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
That's great Roger. Congratulations on getting your car back. I can't imagine how excited you must have been when you found it. Which I'm sure took some serious research.

Sadly, since the interior is now a different color, the original seats are long gone. And at the least, if they were recovered, they most likely wouldn't have put the build sheet back.

Did your car come with the sleeper dog dish caps, or did it have the SS wheels on it?

All in all, very cool!

Postsedan 08-18-2009 11:59 PM

Re: RogerD's 1969 Dick Harrell Chevelle
 
Roger,

I for one truly do hope your car is the real deal.....however, lots more to learn about it...and why?

I would tend to agree with.... Mr.70

"It looks like it coulda been delivered from the factory to Bill Allen Chev.as a Super Sport,before being sent to DHPC where it was doctored down,(SS body emblems removed),to be a "sleeper" of sorts and have the 427cid.installed,among other items."

OR most likely began life as an SS going down the assemble line....this explains the 72 72 code. Otherwise it would have been a - - paint code.

"Original 12 bolt rear end with 4.10 positrack gears is gone - has a 10 bolt installed now . . ."

You`ll either have to try and find a KK code 12 bolt case. Which are getting extremely harder and harder to find. Or find a dated 12 bolt and add the 4:10`s to it.

Or another guess, is perhaps it was born with a different gear set (3:31 or 3:55) and the 4:10 was part of the DHPC?

Many questions?

Dan.

RogerD 08-19-2009 01:22 AM

Re: RogerD's 1969 Dick Harrell Chevelle
 
Dan - My car is the real deal, just missing a few (key) components - I will plan to restore it as GM built it and as modified by Harrell's shop :biggthumpup:

Bottom line, I have THE 1969 DHPC Chevelle I bought brand new on Aug 19, 1969 - today is Aug 18, 2009 - almost 40 years later on the nose :)
I know it's missing a few (key) components but it will make one heck of a ride for me & Karen even if it NEVER qualifies for the 'hall of fame' :biggthumpup:

--------------------------------------------------------------------------------

My hat is off to Dan P (1968MotionL88) - he provided a VITAL bit of information that ultimately led to the successful tracking down of my 1969 Dick Harrell Chevelle!!!!!
Quote:

Originally Posted by Postsedan (Post 1044349)
Roger,

I for one truly do hope your car is the real deal.....however, lots more to learn about it...and why?
I would tend to agree with.... Mr.70

"It looks like it coulda been delivered from the factory to Bill Allen Chev.as a Super Sport,before being sent to DHPC where it was doctored down,(SS body emblems removed),to be a "sleeper" of sorts and have the 427cid.installed,among other items."
OR most likely began life as an SS going down the assemble line....this explains the 72 72 code. Otherwise it would have been a - - paint code.

"Original 12 bolt rear end with 4.10 positrack gears is gone - has a 10 bolt installed now . . ."
You`ll either have to try and find a KK code 12 bolt case. Which are getting extremely harder and harder to find. Or find a dated 12 bolt and add the 4:10`s to it.
Or another guess, is perhaps it was born with a different gear set (3:31 or 3:55) and the 4:10 was part of the DHPC?

Many questions?

Dan.



All times are GMT. The time now is 07:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.