The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   Is this a real Motion car? (https://www.yenko.net/forum/showthread.php?t=105392)

al8apex 06-18-2009 06:14 AM

Is this a real Motion car?
 
I expect someone to make him an offer he can't refuse and this will end up being sold OFF ebay

http://cgi.ebay.com/ebaymotors/ws/eBayIS...d#ht_500wt_1386

x Baldwin Motion 06-18-2009 01:31 PM

Re: Is this a real Motion car?
 
when it rains, it pours!

http://i.ebayimg.com/11/!BUlifTw!mk~...Ty)wHQ~~_1.JPG

Dave Rifkin 06-18-2009 03:25 PM

Re: Is this a real Motion car?
 
Did any of the Motion Camaros come through with flat hoods?

DarrenX33 06-18-2009 04:24 PM

Re: Is this a real Motion car?
 
It would have been up to the customer. I remember an article with a Motion 75 or 76 Camaro where the customer opted for the 569 lo-rise intake to run the stock hood.

TwoBryans 06-18-2009 04:45 PM

Re: Is this a real Motion car?
 
Did Joel ever build or do a conversion on an a/c car? I have never seen one. https://www.yenko.net/ubbthreads/imag...s/confused.gif

Xplantdad 06-18-2009 04:53 PM

Re: Is this a real Motion car?
 
[ QUOTE ]
Did Joel ever build or do a conversion on an a/c car? I have never seen one. https://www.yenko.net/ubbthreads/imag...s/confused.gif

[/ QUOTE ]

Adam's Vette has AC...correct?

[ QUOTE ]
On June 3, 1971, Dr. Henry Rollings took delivery of his air conditioned, 500-plus horsepower, 1971 Phase III GT from Joel Rosen at Motion Performance in Baldwin, New York. Power was supplied by a blueprinted and balanced 454 big-block built to LS-7 specifications and fitted with Phase III cam and valve train, open chamber ZL-1 aluminum heads, headers and an 850 cfm Holley 4-barrel. Backing up the potent Phase III engine; A massaged M40 Turbo Hydramatic, Hone overdrive and a 4.88 Posi rear. Creature comforts include a custom interior and stereo system and numerous factory power options.

[/ QUOTE ]

TwoBryans 06-18-2009 05:07 PM

Re: Is this a real Motion car?
 
Bruce,

Thanks! You are exactly right! https://www.yenko.net/ubbthreads/imag...ns/worship.gif I forgot about that one. The older I get, it seems like I forget much more than I used to remember! LOL!!

I guess to narrow down the question, does anyone know of any 2nd Gen Camaros that had a/c that were built or converted by Joel? https://www.yenko.net/ubbthreads/imag...s/confused.gif https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

owners2 06-18-2009 06:29 PM

Re: Is this a real Motion car?
 
I don't see A/C am i missing something ?? It looks to me like an 80's re-paint.

flyingn 06-18-2009 07:32 PM

Re: Is this a real Motion car?
 
yea that camaro is a non ac car. look at the hvac controls. Def non ac

[ QUOTE ]
I don't see A/C am i missing something ?? It looks to me like an 80's re-paint.

[/ QUOTE ]

Justbad Joe 06-18-2009 09:06 PM

Re: Is this a real Motion car?
 
[ QUOTE ]
Did Joel ever build or do a conversion on an a/c car? I have never seen one. https://www.yenko.net/ubbthreads/imag...s/confused.gif

[/ QUOTE ]
The classic copper/ white stripe 1973 that Dave B. had was an a/c small block car.
Joe https://www.yenko.net/ubbthreads/imag...mlins/wink.gif


All times are GMT. The time now is 08:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.