2116 intake
 

I am waiting on some pictures of a Gm 3972110 intake that I am considering purchasing. I think this is the service replacement for the 3972116 used on the vette and Z28 in 70. I also read that this is identical to 3917610 used in 67-68. My question is, is this 2110 going to have provision for the 68 style driver side alternator? I don't want to buy it if I cannot keep my current alternator setup.



Tommy https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Re: 2116 intake
 

You have that 180 degrees out. A 116 is the service replacement for a 110, not the other way around. Neither the 110 or 116 have the bolt hole for the alternator bracket.

Re: 2116 intake
 

You might be able to drill and tap the pipe plug that is in one hole in the front of the 110/116 intake to use your same altenator brace though.

Re: 2116 intake
 

[ QUOTE ]
You have that 180 degrees out.

[/ QUOTE ]


Your right I did... I got everything backwards... The intake I am considering is a 116, not the 110.


Tommy https://www.yenko.net/ubbthreads/imag...ns/burnout.gif

Re: 2116 intake
 

The 610 intake has a twisted thermostat mount and the 110/116 is straight.


Jason

Re: 2116 intake
 

Here are a few pictures to show the intake differences. On the far right is a 472 69 Z/28 intake, the center is a 2110/2116, and on the left is a 67-68 Z 610 intake.


Jason

http://i179.photobucket.com/albums/w...Intakes001.jpg

http://i179.photobucket.com/albums/w...Intakes002.jpg

http://i179.photobucket.com/albums/w...Intakes003.jpg

http://i179.photobucket.com/albums/w...Intakes004.jpg