The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   65 z16 carb info update (https://www.yenko.net/forum/showthread.php?t=106479)

black69 09-02-2009 01:04 AM

65 z16 carb info update
 
For what its worth, I posted a few yrs back I had a 3130 carb I beleived came off a yellow z16 in florida (parted out). I got advice here that its for a big body chevy, and almost gave the carb away the other day, but then thought hold on (until I was sure).
Now I see a big dollar z16 on ebay (red- black top) with the same exact carb as I have (but mine is mint unrestored). same dates. even has stencil codes on top of fuel bowls,
Is a LIST 3130 the right carb for a z16?? I know a guy that wants my carb, but I want to be sure before I let it go.

SuperNovaSS 09-02-2009 03:32 AM

Re: 65 z16 carb info update
 
3310 is the correct Z16 carb. Chevy sold them over the counter for years so it is common to see them. The original 65 carbs have many unique characteristics though and are quite valuable. What are all the numbers on the choke tower of the carb. There may also be 3 numbers on the left side of the choke horn.


Jason

John Brown 09-02-2009 04:26 AM

Re: 65 z16 carb info update
 
1 Attachment(s)
Even though a 3130 is not a Z-16 Chevelle carb, it is off a 425 horsepower 65 full size Chevrolet and still relatively valuable, especially if it has the 65 only small inlet fuel/float bowls. Just by looking at a picture, the 1965 Holley 3310, 3130 and 3124 all look almost identical. I will attach a picture if a "real" 3310 carb for you so you can see the float bowls I am talking about.

https://www.yenko.net/attachments/417...10holleyII.jpg

Fast67VelleN2O 09-02-2009 04:59 AM

Re: 65 z16 carb info update
 
The 3130 I thought had the small bowls.

SuperNovaSS 09-02-2009 05:07 AM

Re: 65 z16 carb info update
 
It did unless it was a later service carb,


Jason

black69 09-02-2009 06:57 PM

Re: 65 z16 carb info update
 
check out the car than makes me wonder, I believe a 3130 is correct, not a 3310. here this car is previously owned restored by a z16 expert (dave milner?). there is a perfect carb pick if you scroll down. mine has that same date code.

http://cgi.ebay.com/ebaymotors/Chevrolet...5fCarsQ5fTrucks

black69 09-09-2009 09:55 PM

Re: 65 z16 carb info update
 
I guess with no more responses, and the car I referenced with a 3130 is a dave miner car, I will assume 3130 is the correct carb for a 65 z16. Whether a 3310 is also correct is outside my relm, but to me a 3130 is correct too if it was on a dave miner car.

VintageMusclecar 09-10-2009 04:22 AM

Re: 65 z16 carb info update
 
Several years ago I restored a 3130 for one of Dave's cars, but I don't have the paperwork on that job handy so I can't tell you what the date was on that particular carb. I do believe he intended to use that carburetor temporarily while he attempted to track down an original 3310, which he finally did do. Perhaps the 3310 never found its way under the hood, I don't know.

For the record:

3130 = B body
3124 = Corvette
3310 = Chevelle Z16

Hope that helps.
Eric

VintageMusclecar 09-10-2009 04:33 AM

Re: 65 z16 carb info update
 
1 Attachment(s)
Here's a pic of the 3130. (still don't know what the date was)

https://www.yenko.net/attachments/418818-3130DMafter.jpg

VintageMusclecar 09-10-2009 04:35 AM

Re: 65 z16 carb info update
 
1 Attachment(s)
Here's the 531 dated 3310 I restored for Dave--as it arrived to me.

https://www.yenko.net/attachments/418...unrestored.jpg


All times are GMT. The time now is 12:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.