BBC alum head recomendations
 

Looking to buy a decent pair of aftermarket alum heads..recomendations?..going to support a 489/496 combo..thanks

ALbert

Re: BBC alum head recomendations
 

Have had great results with the Dart 325s and the Edelbrocks.Both combos with hyd rollers make 600/600.
Good luck and pm me if you want. Jeff

Re: BBC alum head recomendations
 

Edelbrock is the way to go!! https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

Rich https://www.yenko.net/ubbthreads/imag...lins/beers.gif

Re: BBC alum head recomendations
 

I like my Dart heads 816 hp Been together 3 years............set the valves once!!!!!! Thats it.
OK maybe replace a plug once in awhile.

Re: BBC alum head recomendations
 

What are your specific HP and/or performance goals?

Eric

Re: BBC alum head recomendations
 

[ QUOTE ]
What are your specific HP and/or performance goals?

Eric

[/ QUOTE ]

street strip car..would like around 550-600hp

Re: BBC alum head recomendations
 

Just curious when we speak about HP goals on this forum, are we usually talking about WHP as measured on a chassis dyno? Just wanted to clarify cause the delta in this range would be about 120 hp.

Re: BBC alum head recomendations
 

[ QUOTE ]
[ QUOTE ]
What are your specific HP and/or performance goals?

Eric

[/ QUOTE ]

street strip car..would like around 550-600hp

[/ QUOTE ]
Shouldn't be too much of a problem with any set of heads considering your cubes...the killer port velocity of a worked set of ovals would make for a fun street car with plenty of boogie.

Re: BBC alum head recomendations
 

[ QUOTE ]
[ QUOTE ]
What are your specific HP and/or performance goals?

Eric

[/ QUOTE ]

street strip car..would like around 550-600hp

[/ QUOTE ]

You can easily make that with a set of OEM heads, oval or rectangle.

If you want to go with aftermarket heads, I'd look at either the AFR 305's or the Brodix Race-Rite's.

Re: BBC alum head recomendations
 

What about a set of the GM 077 cast heads?
James