9891400 GM clips
 

No, I don't have 9 million clips. What I do have are 30 clips. Six packages, five to a package.

I ordered these many years ago for my 69 Z. The parts guy obviously did not know what he was doing.

Have tried to find the correct application. Once source says 60's GM "G" body cars. Another says all GM cars 72-96 except Pontiac.

They do not look like they could be clipped on a car that has the little pegs welded in place. Appears one would have to use a screw to mount them, but then, I may not be 10% smarter than the part, which I believe is a prerequisite to installation.

At any rate, if you believe you can use them, here they are for free.

Re: 9891400 GM clips
 

Lynn do these clips have the same dimension as the correct ones for the 67-69 camaro. I could use them if they are.

Re: 9891400 GM clips
 

Brian:

I don't have any 67 to 69 clips to compare. Width on these is .903. Height is .740.

They look to me like they would have to be installed with screws instead of snapping on to the little nail head posts like a 67 to 69.

Re: 9891400 GM clips
 

The picture looks like them and the measurement sounds like a fit. I have used stainless screws to put them on when panels were replaced because i don't have a stud gun

Re: 9891400 GM clips
 

PM me your address, & I will mail them to you. If you can't use them, you can pass them on.

Re: 9891400 GM clips
 

Those rear window clips replaced clip #4471409 on July 1972.


For some other applications,click here,and scroll down to part #9891400
http://www.gmpartswiki.com/getpage?pageid=13151

Re: 9891400 GM clips
 

Clips are gone to a new home.