1969 Camaro Parking light housings
 

Here we have a pair of orig housings (MADE IN USA SAE) that have been refurbished. They were in good shape as cores. Stripped (NOT blasted) It is detrimental to the plating finish. They were Zinc Dichromate plated via a local plater. They are not Cadmium as orig, but the zinc is very very close. The fronts were painted with a high gloss white enamel. The sockets were polished and contacts burnished with a rubberized abrasive to assure good electrical contact & Re-crimped . The harness ends were trimmed <1/8" to get access to fresh copper conductor and the wire harnesses cleaned and the Packard series 56 spades were replaced with new terminals and crimped using a factory style double crimper. They include new locking nuts for mounting. Just use your gasket and lenses. Mount them up and see how this really details the lower valance area when viewed with the hood open. Affordable option to the imported reproductions.
$175 + packing & shipping from 98311.
Thanks
Jim W
https://lh3.googleusercontent.com/-v...0/100_4998.JPG
https://lh4.googleusercontent.com/-3...2/100_4999.JPG

Re: 1969 Camaro Parking light housings
 

I would like to buy the pair.

Re: 1969 Camaro Parking light housings
 

PM sent!

Re: 1969 Camaro Parking light housings
 

[email protected]. I tried your email address listed in your profile but it says it is an invalid email address.

Re: 1969 Camaro Parking light housings
 

You have to remove the remove me first part!

Re: 1969 Camaro Parking light housings
 

Hi Jim. I got you voice message late last night while I was firing up my motor for the first time in the car. I will call you today.

Re: 1969 Camaro Parking light housings
 

Hey Jim just checking to see if you received my email? If so send me back an email and I will send you my shipping details.

Thanks