The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Pontiac (https://www.yenko.net/forum/forumdisplay.php?f=121)
-   -   pontiac 366 NASCAR Ram Air V engine (https://www.yenko.net/forum/showthread.php?t=127837)

tjs44 06-28-2014 09:45 PM

pontiac 366 NASCAR Ram Air V engine
 
Just built a very rare 366 NASCAR RA V engine for my 69 bird.Just got it off Joe Shermans dyno.Ran it with a single 4bbl carb as it will be put in the car and a 2-4 intake with a pair of small AFBs.With the duals it made 452 HP @6700.True 9.5 CR calif pump gas engine.Will post a vid.Tom

tjs44 06-28-2014 09:46 PM

Re: pontiac 366 NASCAR Ram Air V engine
 
hope this works
https://www.youtube.com/watch?v=JAsCqHzVLxI

Xplantdad 06-29-2014 12:59 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
Wow...that sounds great! [img]<<GRAEMLIN_URL>>/headbang.gif[/img]

tjs44 06-29-2014 01:04 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
I could not believe how long it took the secondary air flaps to open.Seemed like the carbs were wide open forever before the engine went full tilt.Joe shut it down at 6700 but was still climbing.Tom

Xplantdad 06-29-2014 03:03 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
It was still pulling HARD!

tjs44 06-29-2014 03:20 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
AND we used hyd roller lifters!I kind of think it might have made HP too 7K!

Xplantdad 06-29-2014 04:03 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
I'd have to think so!!

ktownkid 06-29-2014 01:57 PM

Re: pontiac 366 NASCAR Ram Air V engine
 
Not much info on &quot;Google&quot; about the 366 Nascar motor......would love to read more.

Any advice....?

Thanks-
ktownkid [img]<<GRAEMLIN_URL>>/youguysrock.gif[/img]

tjs44 06-29-2014 05:46 PM

Re: pontiac 366 NASCAR Ram Air V engine
 
They were run in the early 70s,kind of started life as RA Vs but they had no TQ off the corners so they were raced with RA IV heads and a Nash intake.Buck Baker and David Person raced the firebirds in the baby grand series.There are pics of their cars on the net.They used a unique block that was exactly like a RA V but had a drysump provision on the back of the cam tunnel.My block is engineering number one and does not have it.They used a 455 forged pistons with a 7.04 long rod made by MR.Rod Co.The cranks were 3in main forged units done mostly by Kellogs but I know Reath made some for the Bakers.My engine was designed as a IV but I built it as a V.If you go to the Performance Years site there is info on there.Search threads started by Tom S and will be easier to find.Tom

tjs44 09-11-2014 02:02 AM

Re: pontiac 366 NASCAR Ram Air V engine
 
3 Attachment(s)
Here is a pic of the car and the engine installed.Tom


All times are GMT. The time now is 04:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.