spraying rattle can bare steel paint
 

Having a problem spraying bare steel paint/stainless paint. When you spray it clumps up and gets rough.Tried different cans all the same.Anyone else have this same problem?shaking the can for along time makes no difference. thanks

Re: spraying rattle can bare steel paint
 

fine coat of primer first may help, I use Sherwin Williams self etching primer

Re: spraying rattle can bare steel paint
 

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: quik9r</div><div class="ubbcode-body">fine coat of primer first may help, I use Sherwin Williams self etching primer</div></div>

Yep -- self etching primer is a must ... for sure on steel ... TAZ

Re: spraying rattle can bare steel paint
 

You must have something on the metal I never use primer so easy to do bare metal

Re: spraying rattle can bare steel paint
 

Was you spraying out in the hot sun and the metal was hot? That will cause the clumps.

Re: spraying rattle can bare steel paint
 

the paint goes on top of epoxy primer mixed with reducer as a sealer

Re: spraying rattle can bare steel paint
 

What brand are you using John ?

Re: spraying rattle can bare steel paint
 

inline tube brand

Re: spraying rattle can bare steel paint
 

I will not buy anything from them [img]<<GRAEMLIN_URL>>/bs.gif[/img] for reasons I won't go into here. So I never used there brand, most likley it is repackaged anyway. I have had nice results with Seymour paints, but I do not use allot of rattle can paint.

Stainless Paint

Re: spraying rattle can bare steel paint
 

Mike
Can you show us a picture of what you painted with that?
Can it handle High Heat too?