69 Malibu Rear Panel Moldings & Clips
 

Looking for OEM (not reproduction) upper and lower moldings for a 69 Malibu, that go on the panel between the tail lights. Also want the 16 original mounting clips that hold them in place: 6 upper and 6 lower plastic clips that fit into the elongated mounting holes on the rear panel; 2 upper and 2 lower metal clips with threaded stud that go thru the round holes at either end of the panel. PM or email, and thanks in advance!

Do you have a picture of them. I have a lot of old Dorman and Aveco hardware from the 70’s.

As far as the unique plastic oval hole clips....GM made several different sizes for various cars.
You must make sure you have the correct sizes.

Dan

I actually do have pictures, provided by a very helpful member on this site. But as Dan says, GM made different sizes for different applications, so I think I would need to have actual measurements (which I don't have) in order to pinpoint which ones I need. Thanks for your inquiry though!

Here's a picture of what all four types of the necessary clips look like. Picture courtesy of Phil Woj :worship: