The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Supercar/Musclecar Discussion (https://www.yenko.net/forum/forumdisplay.php?f=79)
-   -   What are these headlight for? (https://www.yenko.net/forum/showthread.php?t=169185)

sixt9rsx33 10-03-2021 08:07 PM

What are these headlight bezels for?
 
1 Attachment(s)
I pulled these off of a car in the junkyard circa 2009. Are they for a 68 Chevelle?
Thanks

Lee Stewart 10-06-2021 06:55 AM

https://i.postimg.cc/2SVJjRHM/0.jpg

sixt9rsx33 10-09-2021 12:01 PM

Thanks Lee. If anyone wants them let me know. Pay shipping that is it.

Lynn 10-10-2021 11:48 PM

1 Attachment(s)
Looking at the pic of the bezels comparing to the pic of the car, it doesn't look like these fit a 68 Chevelle.

Does someone have a pic of a 68 Chevelle bezel (I think all four are the same) for comparison?

I could use some for my 68 El Camino, but don't want Lawrence to go to the trouble of getting these to me if they are not a fit.

I found this pic on line; definitely don't look the same.

scuncio 10-11-2021 12:45 AM

Definitely 1970 chevelle.

Lee Stewart 10-11-2021 12:59 AM

https://i.postimg.cc/5ySyyY29/0.jpg

https://i.postimg.cc/pVfpq7JN/0.jpg

olredalert 10-11-2021 02:46 PM

---Lee,,,Take a look at the headlight adjustment holes and you will notice the difference in your two examples. I want to say 69, but without a 69 laying around I can't be posative....Bill S

Lee Stewart 10-11-2021 02:51 PM

Quote:

Originally Posted by olredalert (Post 1566853)
---Lee,,,Take a look at the hedalight adjustment holes and you will notice the difference in your two examples. I want to say 69, but without a 69 laying around I can't be posative....Bill S

I was responding to Scuncio's post: 1970 Chevelle. I will post photo of 1969 Chevelle

Lee Stewart 10-11-2021 02:56 PM

https://i.postimg.cc/BvdwQNb3/0.jpg

Nope

olredalert 10-11-2021 03:05 PM

----The round bottom is what throws me off if the set asked about isn't 70 Chevelle. Because of the adjusters being on thje side and not the top.....Bill S


All times are GMT. The time now is 11:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.