ITM Shifter for 73 Camaro w/ Muncie 4 Spd Trans
 

Looking for a NOS or nice original ITM shifter for a 73 Camaro with Muncie 4 speed trans. Don't need any linkage, just the shifter body. TIA.

PM sent.

Let me know, my buddy has a handful of them. Jeff G. Hartford CT

I appreciate the replies. Since posting, I disassembled my ITM shifter and cleaned it all up. Everything looks in really good condition, but it is missing the reverse lockout spring. I talked at length with Crash about it, and he says that is the Achilles Heel of those shifters, the reverse lockout spring breaks and disappears, and there are no designated repair parts available. I'm going to do some measurements and try to find one at McMaster-Carr that I think might work. All the problems I was having with the shifter were either when going into or coming out of reverse gear.....other than that, it shifted very nicely.

Bill that is typical of those shifters. I was lucky and found an early takeoff that worked great. I can see why alot of them were replaced.