70 Duece sway bar links?
 

Found these on the Bay..are they correct for a 70 Duece? Thought it may be of interest for someone here.

ALbert

http://cgi.ebay.com/ebaymotors/ws/eBayIS...430694&rd=1

http://cgi.ebay.com/ebaymotors/ws/eBayIS...433328&rd=1

and of course I have put this in the wrong place again https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 70 Duece sway bar links?
 

Those sway bar links are NOT correct for a 70 Nova with F41 suspension, originals have the bottom bolt (where it attaches to the bar) at the bottom,not the side like the Ebay items, originals are also straighter. SULLY

Re: 70 Duece sway bar links?
 

Here is a link to the pics I just posted with the correct link..

70 deuce sway bar pic

Re: 70 Duece sway bar links?
 

I know nothing about them..just trying to help out..the knowledge here is second to none.

ALbert

Re: 70 Duece sway bar links?
 

EBAY auction another example of seller Ed S providing inaccurate info (aka Lying)
Chuck Sharin

Re: 70 Duece sway bar links?
 

We have pics of the two types of vertical bars in the deuce book. Both will work, but the shorter ones will sometimes rub the diff cover if air shocks are installed.

The main debate over the years has centered on the finish of the bars. Most cars are restored to match the front bar, ie; the sway bar is natural and the verticals are black. However, on the NOS setup I found several years ago, the colors were the opposite, so I restored mine to match. I have seen plenty of original deuces, and the rear area is either too dirty, rusted, rattle-canned black (or white), or the bar is missing entirely. So, at this time we don't conclusively know the finish on the bars.

Also, the lower spring mounting plates with the special ear for the F41 cars is still available from GM, but it is different than the originals.

Re: 70 Duece sway bar links?
 

Marlin,
Do you know the part numbers for the mounting plates? Earl

Re: 70 Duece sway bar links?
 

#3983073 & #3983074, They are left and right, and can't be swapped - read, I tried and learned https://www.yenko.net/ubbthreads/imag...mlins/grin.gif

Also, when installing the small bracket to the mounting plate (also available #3983075; superceded #3913863) along with the bushing (also available #481432) use the correct sized bolts - 5/16" I believe. I tried using 3/8", which will fit in the holes, however the last bolt installed will break when you tighten them. I don't really know why, but after breaking 3 of them, I figured the bolt was torqued into the hole and I was simply pulling the heads off!

Re: 70 Duece sway bar links?
 

Tommy K, you out there? What's the finish look like on your unrestored Wallace Deuce sway bar? https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

Re: 70 Duece sway bar links?
 

I'll scan a pic of his a/t deuce sway bar. Very cool car btw, can't wait to see it again.