![]() |
Aftermarket Aluminum Heads...any advice?
Just starting the hunt for alloy heads for the 302.Does anyone have any advice as to what they think is best. https://www.yenko.net/ubbthreads/imag...s/rolleyes.gifI've been doing alot of research and it looks like it may come down to something from either AFR or Brodix...but which one? https://www.yenko.net/ubbthreads/imag...lins/dunno.gifAFR makes a 210cc SPEC racing head with a 66cc combustion chamber that would be close to the stock 64cc for around $1995/pr.complete.
Planning on building a roller cam (hydralic)11:0 motor and using my stock LT-1 manifold. Any suggestions would be welcome. https://www.yenko.net/ubbthreads/imag...iggthumpup.gif Thanks, John |
Re: Aftermarket Aluminum Heads...any advice?
Hey John,
I have both AFRs and Brodix aluminum heads that are going on two way different projects. AFRs are going on my ZL-1 project. I just ordered a set of Brodix 200cc Race Rites with the CNC chamber option that will go on a stoker 383 SBC with a hyd roller. I have heard the Brodix will out flow the AFR 210 to about .500 lift. I doubt if you could go wrong with either one of the companies. They both put out an excellent product with many years of experience behind them. Ross |
Re: Aftermarket Aluminum Heads...any advice?
[ QUOTE ]
Hey John, I have both AFRs and Brodix aluminum heads that are going on two way different projects. AFRs are going on my ZL-1 project. I just ordered a set of Brodix 200cc Race Rites with the CNC chamber option that will go on a stoker 383 SBC with a hyd roller. I have heard the Brodix will out flow the AFR 210 to about .500 lift. I doubt if you could go wrong with either one of the companies. They both put out an excellent product with many years of experience behind them. Ross [/ QUOTE ] Funny,I had hear just the opposite about AFR outflowing Brodix but that's why I'm asking.I have both catalogs and have been waffling back and forth.Brodix makes like 20+ 23 degree sbc heads! https://www.yenko.net/ubbthreads/imag...emlins/eek.gif What did your CNC race rites run you? |
Re: Aftermarket Aluminum Heads...any advice?
PM sent.
Ross |
Re: Aftermarket Aluminum Heads...any advice?
Thanks Ross!
|
All times are GMT. The time now is 11:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.