finding the thread on adjusting Solid lifter cams
 

can anybody connect me to that long thread about adjusting the valves on a BB or SB chevy solid cam.? Seem to recall a slightly different method than factory. Thanks much SULLY

Re: finding the thread on adjusting Solid lifter cams
 

The best one is the one on the CRG site... it works with all mechanical lifter chevrolets.

Re: finding the thread on adjusting Solid lifter c
 

[ QUOTE ]
The best one is the one on the CRG site... it works with all mechanical lifter chevrolets.

[/ QUOTE ]

The link here.....
http://www.camaros.org/302valves.shtml

Re: finding the thread on adjusting Solid lifter c
 

Thanks... I just had to reboot my computer it wouldn't let me get to the CRG site to find the link!

Re: finding the thread on adjusting Solid lifter c
 

Sully: it's your business, but if you're settin' em on those L78s, here is THE BEST way to do it...buy a cheap *bump* button for your starter, and you can go from valve-to-valve simply and more importantly quickly...

Set the intake as the exhaust opens...
Set the exhaust as the intake closes...

Re: finding the thread on adjusting Solid lifter c
 

Rob is right--the old "EO - IC" method (exhaust opening, intake closing) is the best way IMO and takes the memorization out of the process! Good luck.

Re: finding the thread on adjusting Solid lifter c
 

Thanks to all and thanks Rob, I am printing the whole damn thread. SULLY

Re: finding the thread on adjusting Solid lifter c
 

[ QUOTE ]
Rob is right--the old "EO - IC" method (exhaust opening, intake closing) is the best way IMO and takes the memorization out of the process! Good luck.

[/ QUOTE ]

It may work with a stock L78 but won't work with a stock 302, the lifters are still on the ramps because of the overlap...

The CRG method will work on any solid lifter Chevrolet.

Re: finding the thread on adjusting Solid lifter c
 

Is the CRG site blown.? Tried multiple times to get on , no go. SULLY

Re: finding the thread on adjusting Solid lifter c
 

[ QUOTE ]
Is the CRG site blown.? Tried multiple times to get on , no go. SULLY

[/ QUOTE ]

Sully,
The link works for me.