The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   L-78 engine Birth date (https://www.yenko.net/forum/showthread.php?t=89963)

zl12iv 12-27-2006 09:19 AM

L-78 engine Birth date
 
Hi
Do you know the date this motor was produced?
will 65 corvette come with L 78 engine option?
is there a true 65 corvette L 78 425 hp car?
your effort is appreicated. Joe 69 camaro 427

PeteLeathersac 12-27-2006 09:47 AM

Re: L-78 engine Birth date
 
Approx. Feb. '65 on
Yes
Yes

nuch_ss396 12-27-2006 08:43 PM

Re: L-78 engine Birth date
 
This brings up a good point.

How did the '65 396 go from 375hp to 425hp ( Vette only )?
It could not have been just the Vette header-like exhaust
manifolds. Was it a combo of exhaust & ignition? I'm
positive the '65 396-425hp & the '66 396-375hp as well as
the '66 427-425hp all used the 3863143 camshaft.

So, where did those extra 50 hp come from https://www.yenko.net/ubbthreads/imag...mlins/hmmm.gif https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

I remember a Vette owner telling me that some of the SHP
full sized cars came with Corvette exhaust manifolds on
them. Funny, I can't ever recall seeing one of them like
that back in the day.

With GM's interest in making the Camaro the "brute of the
street", you'd think they would have come up with a better
exhaust manifold setup for the F-bodies. https://www.yenko.net/ubbthreads/imag...s/rolleyes.gif

Anyone got any ideas?

Steve

3macs1 12-27-2006 08:50 PM

Re: L-78 engine Birth date
 
One actually sitting in a barn about two miles from me all apart. Been there apart since 1981. Red conv, red and white interior, side pipes and knock offs, 4spd. Original l-78 /425 motor had a noise in it but original. He paid 2500 for it in 81. Reason I remember was I looked at it first and wanted the motor out of it for my chevelle but backed off when I heard it running. Imagine DAAAAAAAAA. Must have been the beaver also Pete that hit me. Joking aside I was just a kid working for 2.00 per hour that was a lot of money to me.
It was out sitting in three feet of snow that day.I actually told him about it and he bouight it. He has a few cars all of which he eventually does the pro stock thing to like his 57 chev, 69 GTO. 40 Ford pick up and some year essex?? 30 maybe. So far he has not seen the vette in that light, hope he never does while at the same time will never sell it or restore it.

COPO_Anders 12-27-2006 08:50 PM

Re: L-78 engine Birth date
 
I have an article somewhere in which Joel Rosen says that the 375 hp L-78 engines are identical to the 425 hp Corvette 396 engines made in 1965. Not counting the exhaustmanifolds.

PeteLeathersac 12-27-2006 09:09 PM

Re: L-78 engine Birth date
 
I believe they differ only in camshafts and lifters between the 425 and 375's? .

Sad about the car in your story Mac...a coupe as an '65-L78 or '66-L72 has been my #2 favourite car for years...2'nd only to a Canadian '61 409 Strato-Chief utility post! .

https://www.yenko.net/ubbthreads/imag...lins/beers.gif
~ Pete

nuch_ss396 12-27-2006 09:55 PM

Re: L-78 engine Birth date
 
Pete,

My research shows that they used the same camshaft between
the two years I mentioned above.

Anders,

I expect that the exhaust has maybe 20-25hp gain. Does the
TI ignition add the remainder of the hp gain?

Steve

3macs1 12-27-2006 10:23 PM

Re: L-78 engine Birth date
 
Here is what I got one time when I asked this question.
Insurance concerns plus General Motors Corporate policies resulted in the use of a lower RPM rating resulting in decrease from 425 HP to 375 HP as a running change for all models except corvette. The L-78 was released for sale in the 1966 SS-396 Chevelle in March 1966 with a rating of 375 HP due to this lower RPM rating and somewhat more restrictive exhaust manifolds, it was otherwise identical to the 425 HP '65 Corvette.( same cam)
The 1965 Z-16 396 Chevelle had the same engine except the Z-16 used a hydraulic camshaft which effectively limited RPM to the lower 375 HP rating.(L-37)
Also all of my 66 Impala/ Biscayne l-72 427's came with the
3880827 and 828 vet exhaust manifolds originally.

Paul D 12-27-2006 10:53 PM

Re: L-78 engine Birth date
 
My '66 Impala SS L72 also came with the Corvette cast iron exhaust manifolds.

Stefano 12-27-2006 11:13 PM

Re: L-78 engine Birth date
 
I have never Dynoed the different exhaust manifolds side by side but it would be no where near a 50 hp difference.

The top dog prior to the mystery motor was the 409/425. GM could not go backwards in the public eye/marketing, at least at the initial release of their new solid lifter engine.

Some early '66 L78 Chevelles have been documented as showing the L78 option rated at 425hp.

I believe Bill Thomas' Blue printing guide/book has a dyno chart or info showing that the L78 could produce 425hp if brought to exact specs.

The First 427/L72s were factory rated at 450hp.


All times are GMT. The time now is 06:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.