muncie m21 with shiter
 

good muncie m21 with good shiter $1500 stored in my body shop so its dusty http://www.mediamax.com/wjoey/Hosted/499%20042.jpg http://www.mediamax.com/wjoey/Hosted/499%20041.jpg

Re: muncie m21 with shiter
 

Looks like a M20 to me.


Jason

Re: muncie m21 with shiter
 

decodes on case to m21 but I have been wrong before

Re: muncie m21 with shiter
 

What decodes as M21 on the case? It looks to be a 325 case which is early with no rings on the input shaft.



Jason

Re: muncie m21 with shiter
 

which means it is a 7/8" countershaft = early trans

Re: muncie m21 with shiter
 

It still could be a M21...it could have a replacement input and thus would have no rings on it designating m20 or m21 . Only way to tell for certain is count the input teeth or the front cluster teeth.

Re: muncie m21 with shifter
 

Why would the replacement input shaft have no rings?



Jason

Re: muncie m21 with shifter
 

Don't know why but any over the counter replacement input I have seen came with no rings. It got real tricky in the early 70's with the dual plug 661 cases with the large shafts and fine spline inputs in the big pontiacs up here.They also for some reason never had any grooves and more than one of these m21's were sold off as M22.Joey's case is a 64/65 325 case from what I can see, small 7/8 pin.

Re: muncie m21 with shifter
 

You are correct it is a 64 65 tranny the shifter looks like a gto shifter but I am unsure what do you think?

Re: muncie m21 with shifter
 

Hi Joey:
Shifter does not look 64 /65 to me looks like 70-72 GTO. To be sure see if it has a 3138 stamped on the front which I think it will and put a shim down the side and pull the handle see if it is a 4555. If not let us know the number and I should be able to tell you the original application. Tks Joe