The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   Can anyone help with a block stamp? (https://www.yenko.net/forum/showthread.php?t=97454)

DannyD 03-03-2008 04:46 PM

Can anyone help with a block stamp?
 
Can anyone help? Does this stamp look legitimate? Hopefully this post is OK in this forum. Thank you. The car is a Fremont built 1967 L79 El Camino.

http://i16.photobucket.com/albums/b3...9/P1010355.jpg

Rixls6 03-03-2008 04:51 PM

Re: Can anyone help with a block stamp?
 
You need to clean the paint off so it's easier to see.

Mr.Nickey Nova 03-03-2008 08:59 PM

Re: Can anyone help with a block stamp?
 
Looks a little heavy on the stamping to me.Most original stampings are on the lighter side.

PeteLeathersac 03-03-2008 09:36 PM

Re: Can anyone help with a block stamp?
 
Kind've 'hilly' too?.

~ Pete
https://www.yenko.net/ubbthreads/imag...lins/beers.gif

nuch_ss396 03-03-2008 09:44 PM

Re: Can anyone help with a block stamp?
 
Danny,

Take a razor edge to the stamp pad and repost that image.
It's hard to tell from all the orange.....

Nuch

bad1racing 03-04-2008 08:36 PM

Re: Can anyone help with a block stamp?
 
Danny,According to my parts book if it says ER on it.It's a 1967 Chevelle 327 Special High Performance and A.I.R.
Let me know if it's something else and I can look it up for ya.
Kendall https://www.yenko.net/ubbthreads/imag...iggthumpup.gif

DannyD 03-04-2008 09:03 PM

Re: Can anyone help with a block stamp?
 
Thanks. I guess my concern is the stamping itself and the fact that is an L79 but no vin is present. The casting date is 8-22-66. The car has the POP with the same info as the stamp. The trans and rear are correct also. Thanks again.

snydes 03-05-2008 04:39 AM

Re: Can anyone help with a block stamp?
 
Would that plant have stamped vin on the back of the block at the oil filter? I know at some point certain plants were doing this, but I don't know when, where or what models. Just a thought.

Supergas990 03-05-2008 11:09 PM

Re: Can anyone help with a block stamp?
 
My 67 SB Chevelle has the code stamp with no VIN that I can find anywhere. Luckily it matches the POP and was original when I rebuilt it.

Blair

x Baldwin Motion 03-06-2008 01:10 AM

Re: Can anyone help with a block stamp?
 
I had been told that all the HiPo small blocks got the Vin stamped on the pad starting in 65. And mostly all small blocks by 67. However some plants as we know, did things differently. https://www.yenko.net/ubbthreads/imag...lins/dunno.gif

good luck. 67 elco rocks!!


good info at www.chevellestuff.com
and posting at www.chevelles.com


All times are GMT. The time now is 08:56 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.