The Supercar Registry

The Supercar Registry (https://www.yenko.net/forum/index.php)
-   Technical & Restoration (https://www.yenko.net/forum/forumdisplay.php?f=86)
-   -   1970 Chevelle F-41 Upper Rear Control Arms (https://www.yenko.net/forum/showthread.php?t=99717)

blackls6 07-04-2008 03:00 AM

1970 Chevelle F-41 Upper Rear Control Arms
 
Is both upper rear control arms for a 1970 Chevelle with f-41 suspension suppose to have the reinforced plates? I was told it was only on one side, but my car had two!
Thanks! John

Bill Rose 07-04-2008 03:50 AM

Re: 1970 Chevelle F-41 Upper Rear Control Arms
 
Only the driver side should have the reinforcement John. It was added because they had to trim the left side control arm so it wouldn't hit the 12 bolt housing. It was only a problem on the left side, of 12 bolts, so the rt side shouldn't have the reinforcement.

blackls6 07-04-2008 05:54 AM

Re: 1970 Chevelle F-41 Upper Rear Control Arms
 
Hi Bill,
Thanks for the information.
I guess that anything is possible with the factory back then.
Thanks! John


All times are GMT. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.


O Garage vBulletin Plugins by Drive Thru Online, Inc.