Quote:
Originally Posted by A12pilot
That is actually incorrect. A ballast needs no draw of power, it just needs power supplied to one end for it to be reduced on the other end. By the basic dynamic function of the ballast, power going through it from one side to the other through the ceramic reduces the voltage to the determined level. Draw on one end does not affect the voltage drop. A ballast does the voltage drop by just doing what a ballast does, but it doesn't need a load on it. The 12V brown wire is needed on the ignition 1 circuit to bypass the ballast due to ballast limiting the volts through itself.
Cheers 
Dave |
and perhaps I would be feeding you fake advice to get you more frustrated? Hmmmmm