Vinyl application...3M Di-Noc Dark Walnut. Di-Noc is actually mentioned in The AIM. A 5 yard roll was just right. I have always preferred dry application of vinyl, and fortunately dry is what was specified.
I started with the fenders and added the trim before moving towards the rear. Pretty straight forward, applied an adhesion promoter on edges and a heat gun to wrap edges. The fenders needed to be off to wrap the rear edges of the fenders and forward edges of the front doors. Also the fender trim clips are retained with nuts on the back side.
To have enough vinyl to properly wrap the gas door and opening required using a separate piece and line up the grain to match pattern.
|