I think Mitch has. That's what he meant by this: " I, also, have a hand bender with the correct size wheel for the tubing that I use for any sign it will kink at the tightest curve at the center. Patience and care will get it as straight as it's going to be."
For what it is worth, I did the same thing Mitch did to straighten out my SS brake line that came to me bent so it could fit in the shipping box. Just used the wheel as a caution, as I never saw any sign of it kinking.
My car will not be judged during my lifetime. So, I didn't bother to check on whether there would be deductions for SS brake and fuel lines.
__________________
Don't believe everything you read on the internet ... Ben Franklin
|