There is a thread on "Team Chevelle" about intake bolts, so I took a few new pics.
Jeff covered 65- 67 well and this is a 69.
Car is still put away, so some are older pics.
All are hardware.
Pics 1- 3 are intake bolts on car.
There are 15 like this.
The RF is a bolt with a stud on top for alternator bracket
Car does not have a bracket on the fuel block like Marty's COPO.
Pic 4 is one type of repop intake bolts being talked about
Close but for sure not exact
Pics 5- 6 are one of 8 flanged exhaust manifold bolts.
They are in the outboard 4 ports
The other 8 are not flanged and are in the center ports.
They do not have the odd shallow thread either.
Will get pics of one when car comes out
Pic 7 is the long bolt holding smog pump in bracket
Pic 8 is bolt holding diverter valve to extension
Pic 9 is bolts holding pulley on smog pump
Pic 10 is wheel stud and all 20 are identical.
|