[bbdon]

A good look at the radiator support can give some clues. It should have the opening cut larger than the one for a small block car. And the big radiator will not sit low enough if a small block type radiator support is used. Look for the big tanks on the radiator and the side mounting brackets. Look to see if there are square nuts welded to the frontside of the radiator support for mounting the radiator. The radiator mounting bolt nearest the pressure cap should go through a nut like that. Check for the holes on top of the radiator support that take the fasteners for the rubber flap. As far as I know, the top fan shroud bracket for the 68 cars is not being reproduced, so that might be a clue if it is still present. It it longer than the one for 69-70 that is in the catalogs. Most of the fakes I have been seeing are not even close to correct and are so easy to spot that it aint funny. I saw a big block Camaro at Pleasanton last weekend the had the drivers exhaust manifold almost touching the steering box. He was not even trying hard on his fake, but he was asking 27K. For some reason, most of the fake BB Novas I see seem to have the six cylinder style top radiator bracket on them.