[nuch_ss396]

Look for the heater core cover with the lines in the center
vs. the end closest to the engine. Look for a BB X-member
( unique 4-speed -and- unique THM400 ). The THM400 version
is tubular ( this application only ) and the BB 4-speed has
a square hole vs. a racetrack shaped hole.

All SHP 69 Camaro applications used the '1105DD pulley
( Z/28 & L/78 & L/72 ).

Look for the engine frame mount part numbers stamped on
the upper portion between the two bolt hole locations.

If the original alternator survived, that would be an '837
part number. Again, SHP only.

There's a good start. The single 3/8" fuel line was already
mentioned.

Steve