Re: Need Help with Crossram Car
If you can find the book on setting up cross rams it may be a big help. I found a book a few years ago at D&R. To make these things work you will need 1-3/4 primary tube headers and at least a 2.5 exhaust system. I have used Dougs headers in the past and I was very happy with the fit and quality. I would recommend a Flow-master cross-over exhaust system kit and cut the tips off at the edge of the quarter panels so you do not see the bigger tubing. You can get the exhaust and headers from Jegs. Another secret is a real good ignition system like a MSD and a carter high performance fuel pump that you can buy from Pep boys. MSD now sells a black cap and black wires for the stock look.
Mark Sheppard
|